Online searchable Eagle c omponent library?

lima7 wrote on Mon, 05 September 2016 03:45

Is there good online library for individual Eagle components?

No.  All libraries made by others suck, and of course don't follow your

conventions for what gets put on the silkscreen, what the part should look

like in the schematic, how information is stored for BOM generation, size

of tDocu and other text for making the board drawing, line widths, etc.

Plenty of people do make their libraries available for others to use, but

vetting them properly is usually more work than just sitting down and

making your own your way.  Except maybe for some hobbyists, it's just not

worth it.

The libraries that come with Eagle are included in this.  They are no

better, often worse, than what you find out there made by professional

users.  But in any case, making your own is a better idea anyway.

--

Web access to CadSoft support forums at www.eaglecentral.ca.  Where the CadSoft EAGLE community meets.

Quote:

All libraries made by others suck,

Yeah, probably, but having an example component you can start from is a lot

easier than having to start from scratch.

I do write most of my own components, but I know I am probably repeating

work that a hundred people have already done. One of the things I was

looking for was a library that I can search through before downloading and

installing it. I have found myself signing up to various websites to get

hold of a library that I eventually discover doesn't have what you want in

it!

I have found myself selecting components based on the availability of eagle

libraries, I needed a trimmer pot recently, RS and farnell had 100s of

suitable examples, but only a couple already had eagle libraries, guess

which I chose!

--

Web access to CadSoft support forums at www.eaglecentral.ca.  Where the CadSoft EAGLE community meets.

The point is, you've probably spent more time searching for libraries provided by others than just doing them yourselves and in the example you gave of trimmer pots, well they'll probably take no more than a couple of minutes to create yourself for any part, so selecting the part to use based solely on available libraries which you will then have to spend time checking is not a benefit.

The more you create your own parts the easier it gets, and in my experience I can create from scratch or adapt something I have previously created in less time than it takes to find, check, and adapt something created by somebody else. It really isn't a time saver in the long run to spend time searching for libraries, especially as the quality of available libraries so variable, ranging from mostly terrible to occasionally vaguely acceptable with some rework.

Best Regards,

Rachael

The point is, you've probably spent more time searching for libraries provided by others than just doing them yourselves and in the example you gave of trimmer pots, well they'll probably take no more than a couple of minutes to create yourself for any part, so selecting the part to use based solely on available libraries which you will then have to spend time checking is not a benefit.

The more you create your own parts the easier it gets, and in my experience I can create from scratch or adapt something I have previously created in less time than it takes to find, check, and adapt something created by somebody else. It really isn't a time saver in the long run to spend time searching for libraries, especially as the quality of available libraries so variable, ranging from mostly terrible to occasionally vaguely acceptable with some rework.

Best Regards,

Rachael