Actions
Forum Thread Details
  • Replies 3 replies
  • Subscribers 179 subscribers
  • Views 339 views
  • Users 0 members are here
Related

Mounting machine output with variants

beanti

Hello,

 

I did some research on that topic but didnt find anything, so my question:

i was searching for a script that outputs coordinates for mounting machines respecting the variants from the schematic, but it seems variants only exists in schematics and not in boards.

Is this possibly with a custom ULP? Or am i missing something?

 

Thanks in advance,

Andreas

Parents

  • On 4/7/2017 7:50 AM, Andreas Becke wrote:

    Hello,

     

    I did some research on that topic but didnt find anything, so my question:

    i was searching for a script that outputs coordinates for mounting machines respecting the variants from the schematic, but it seems variants only exists in schematics and not in boards.

    Is this possibly with a custom ULP? Or am i missing something?

     

    Thanks in advance,

    Andreas

     

    --

    To view any images and attachments in this post, visit:

    https://www.element14.com/community/message/220234

     

     

    Hi Andreas,

     

    I hope you're doing well today. For most people the mountsmd.ulp that

    comes with EAGLE gives the centroid data necessary for most pick and

    place machines. If not it can usually be massaged into something the

    machine will accept.

     

    As a side not most of the support staff hangs out on our new forums

    linked below. I encourage you to check them out.

     

    Let me know if there's anything else I can do for you.

     

    Best Regards,

    Jorge Garcia

     

    --

    We have a new forum here <http://forums.autodesk.com>

     

  • in reply to autodeskguest

    Hi Jorge,

    thanks for your response. I already adapted the mountsmd.ulp for our needs, but i am still missing a function:

     

    We use "variants" in our schematics, and i can't find an option to account for these variants in the pick-and-place output from the board.

    Will try to post this question in the new forums.

     

    Best regards,

    Andreas

Reply
  • in reply to autodeskguest

    Hi Jorge,

    thanks for your response. I already adapted the mountsmd.ulp for our needs, but i am still missing a function:

     

    We use "variants" in our schematics, and i can't find an option to account for these variants in the pick-and-place output from the board.

    Will try to post this question in the new forums.

     

    Best regards,

    Andreas

Children
No Data