Hello friends
I need your help for the create script for the EAGLE
I use this command (Bill Of Material : RUN BOM-AM-17.ulp; | \) from scripr to run a ULP file and it works properly
The problem is that I want to execute ULP that is found in my own folder in located in C: \ Program Files \ EAGLE-5.11.0 \ eagle3d \
How to write the RUN command to include the path that I
Please help me thanks
my script eagle.scr
----------------------------------------------------------------------
# Board Command Menu Setup
# Also includes widths and diameters
#
# Created 09/01/2011
# Also includes widths and diameters
#
# Created 09/01/2011
SCH:
Grid Default;
Change Width 0.006;
Grid On
Change Width 0.006;
Grid On
MENU ' Grid {\
(1) = 0.05 : Grid inch 0.05;|\
(2) = 0.01 : Grid inch 0.01;|\
(3) = 0.001 : Grid inch 0.001;|\
(4) = Default : Grid inch 0.1;|\
--- |\
Grid On : GRID LINES On; | \
Grid Off : GRID LINES Off;\
}' \
'Tools {\
Create Frame : RUN create-frame_v1.0.2.ulp; | \
Re Annotate : RUN 00-Reannotate-sch.ulp; | \
Bill Of Material : RUN BOM-AM-17.ulp; | \
Auto place sheet : RUN APS.ulp; \
}'\
(1) = 0.05 : Grid inch 0.05;|\
(2) = 0.01 : Grid inch 0.01;|\
(3) = 0.001 : Grid inch 0.001;|\
(4) = Default : Grid inch 0.1;|\
--- |\
Grid On : GRID LINES On; | \
Grid Off : GRID LINES Off;\
}' \
'Tools {\
Create Frame : RUN create-frame_v1.0.2.ulp; | \
Re Annotate : RUN 00-Reannotate-sch.ulp; | \
Bill Of Material : RUN BOM-AM-17.ulp; | \
Auto place sheet : RUN APS.ulp; \
}'\
