Actions
Forum Thread Details
  • State Suggested Answer
  • Locked Locked
  • Replies 8 replies
  • Answers 1 answer
  • Subscribers 91 subscribers
  • Views 1421 views
  • Users 0 members are here
Related
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Rotate component in 1.4 is terrible HELP

ninjaninja

Hitting the spacebar while moving a component in the PCB editor used to rotate the component from 0 -> 90 -> 180 -> 270 -> 0.  This has been the way ECAD works since I got out of college.  This no longer works in circuit studio.  Spacebar during move shoots the component off screen ussually (heaven's knows where...  seems like it mirrors on the xy axis or something crazy).  Now I need to push into the component attributes and type in the new angle for EVERY COMPONENT in my layout...  This is terrible bug and requires some attention ASAP.

 

I realize this the "HotFix" thread, but this requires immediate attention.

 

This bug is making this product terrible in my opinion.  When will we see a fix for this?

 

Jerome

Parents
  • 0

    Escalating this to the developers.

     

    E14 Software Team

  • 0 in reply to e14softwareteam

    Any update on this?  I have 3 boards coming down the pike and this bug is getting in the way for productivity.  An ETA would be very helpful in my resource planning.

  • 0 in reply to ninjaninja

    Jerome,

    I 'found' this bug yesterday and have your same concerns, a single component works fine - but multiple parts shoot off the screen.  There is a work-around for this although it's ugly - select the parts you want to rotate then go to move components window, I think it's in the Tools window (I found this last night on a different site by doing a search on the problem - so I'm probably getting it wrong, but you'll get the idea), in the window you have the options to rotate the group of selected components and you have to put in the rotation angle manually.  You rotate the parts by clicking on the location you want to be the rotation axis - it's not good....but till they fix it, it works.

    Hope this helps,

    Steve

Reply
  • 0 in reply to ninjaninja

    Jerome,

    I 'found' this bug yesterday and have your same concerns, a single component works fine - but multiple parts shoot off the screen.  There is a work-around for this although it's ugly - select the parts you want to rotate then go to move components window, I think it's in the Tools window (I found this last night on a different site by doing a search on the problem - so I'm probably getting it wrong, but you'll get the idea), in the window you have the options to rotate the group of selected components and you have to put in the rotation angle manually.  You rotate the parts by clicking on the location you want to be the rotation axis - it's not good....but till they fix it, it works.

    Hope this helps,

    Steve

Children
  • 0 in reply to sun-boy

    Thanks Steve,

     

    I found that sometimes it works on a single component (like the first time you export you schematic to the PCB, and if you select the component through the "move" button on the ribbon), but most of the time and indeterminately so the rotation doesn't work even with a single component.  My normal work flow is to click the component to select it, then drag it around as needed and hit the spacebar to change the angle. 

     

    I found the best work around is once I am dragging the component around I hit <tab> brings up component properties, the <tab><tab> gets me to the angle, and key it in.