This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Some wires connected in schematic didn't get reflected in PCB in circuit studio when I updated my PCB document. Please help?

I created a schematic on circuit studio and when I transferred that design on the PCB, some connections of the schematic were missing in PCB. Also, there were no errors generated when I compiled my project. What might be the issue?

I am attaching screenshots of my schematic as well as my PCB document.

Take a look at pin no. 2,3,4,10,11,12 of PCB component T1 which is transformer that can be seen in the schematic.

Also take a look at LT3573 IC in pcb. Its pin no. 4 is connected to resistor R3 in the schematic but it is not connected to R3 in the PCB.

Attachments:

Parents

0 e14softwareuk over 8 years ago

From the PCB try running Tools | Netlist > Clear All Nets and then from the schematic updating the PCB using Home | Project > Update PCB Document. Also are all your schematics and PCBs up to date with any changes you may have made to library parts.
Cancel
Vote Up 0 Vote Down

Cancel
0 vaidyaparth over 8 years ago in reply to e14softwareuk

Failed to match components is the problem. How can I solve it?
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 vaidyaparth over 8 years ago in reply to e14softwareuk

Failed to match components is the problem. How can I solve it?
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 e14softwareuk over 8 years ago in reply to vaidyaparth

If there is a mismatch between schematic and PCB then from within the PCB editor use Tools | Component Links to ensure everything matches up.
Cancel
Vote Up 0 Vote Down

Cancel
0 vaidyaparth over 8 years ago in reply to e14softwareuk

Yes, I went to component links and I selected add pairs matched by designator option and then performed update. But still the problem is not solved.
Cancel
Vote Up 0 Vote Down

Cancel
0 e14softwareuk over 8 years ago in reply to vaidyaparth

Can you supply a copy of the project as requested? This should help us to identify what the issue is.
Cancel
Vote Up 0 Vote Down

Cancel