Actions
Forum Thread Details
  • Locked Locked
  • Replies 10 replies
  • Subscribers 83 subscribers
  • Views 1886 views
  • Users 0 members are here
Related
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Countersink holes in PCB

jgauthier

Is it possible to create a countersink hole with CircuitStudio?

Parents

  • I don't know of a means to generate or revolve a shape like this.  What you could do is add a large diameter silk screen circle on the "entry" side for the countersink.  You may be able to create a 2D torus in color to place at the same coordinates.  At a glance in 3D, you would have a visible effect at least.  Of course, your fab drawing needs to call out the drill / countersink details.

Reply

  • I don't know of a means to generate or revolve a shape like this.  What you could do is add a large diameter silk screen circle on the "entry" side for the countersink.  You may be able to create a 2D torus in color to place at the same coordinates.  At a glance in 3D, you would have a visible effect at least.  Of course, your fab drawing needs to call out the drill / countersink details.

Children