Actions
Forum Thread Details
  • Locked Locked
  • Replies 3 replies
  • Subscribers 82 subscribers
  • Views 446 views
  • Users 0 members are here
Related
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to add symbol to a new component libraly

karate_wo

Hi.

I want to use this footprint - 

https://www.snapeda.com/parts/SQMW5R47J/TE%20Connectivity/view-part/?ref=search&t=Through%20Hole%205watt%200.47ohm%20#download-modal - bud the symbol is missing.
And if i try take symbol from this - https://www.snapeda.com/parts/ERJ1GNJ393C/Panasonic/view-part/?ref=search&t=ohm - the Altium will crash: https://ibb.co/M6ZP8X5 / https://ibb.co/qnmsPqt
Any ideals?
Parents
  • Former Member
    Former Member

    Hi. They probably didn't supply a symbol because it's a basic component, and expected that the footprint would be added to an existing symbol such as the one in misc. devices. As for the crashing I have had something similar before, and I think it's a bug in CS. I had to copy the component, rename it, save and copile the lib.

  • in reply to Former Member

    The Footprint Providing Service will create a footprint for you free of charge if you request the model of the part you want. Its footprint may be accurate, but it often differs from what we expected in terms of symbols. The symbols that come with CircuitStudio are standard designs and are often used when busy.

    The only thing I don't like about these symbols is the resistors. The ready-made resistor symbol is horizontally wide, so connecting capacitors in parallel consumes unnecessary space in the schematic. Therefore, I reworked the resistor symbols myself as shown in the attached image.

    custom resistor symbol

Reply
  • in reply to Former Member

    The Footprint Providing Service will create a footprint for you free of charge if you request the model of the part you want. Its footprint may be accurate, but it often differs from what we expected in terms of symbols. The symbols that come with CircuitStudio are standard designs and are often used when busy.

    The only thing I don't like about these symbols is the resistors. The ready-made resistor symbol is horizontally wide, so connecting capacitors in parallel consumes unnecessary space in the schematic. Therefore, I reworked the resistor symbols myself as shown in the attached image.

    custom resistor symbol

Children
No Data