Actions
Forum Thread Details
  • Locked Locked
  • Replies 3 replies
  • Subscribers 89 subscribers
  • Views 663 views
  • Users 0 members are here
Related
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Netlist Extraction

jzsori

I downloaded and have started playing with the free trial version.  I am able to open an existing prjpcb file that has 5 schematic sheets.  However, I am having difficulty finding how to extract a netlist from the schematic.

Parents

  • From the schematic editor you can generate an EDIF netlist (Outputs | EDIF for PCB), within the PCB editor a netlist can be generated using Tools | Netlist > Export Netlist from PCB and Tools | Netlist > Generate Netlist from Connected Copper.

     

    If looking to transfer a netlist to create a PCB when this is done by creating a blank PCB (File > New Document > PCB) and then from the schematic using Home | Update PCB Document.

Reply

  • From the schematic editor you can generate an EDIF netlist (Outputs | EDIF for PCB), within the PCB editor a netlist can be generated using Tools | Netlist > Export Netlist from PCB and Tools | Netlist > Generate Netlist from Connected Copper.

     

    If looking to transfer a netlist to create a PCB when this is done by creating a blank PCB (File > New Document > PCB) and then from the schematic using Home | Update PCB Document.

Children
No Data