Featured Articles
Announcing Pi
Technical Specifications
Raspberry Pi FAQs
Win a Pi
Raspberry Pi Wishlist
Actions
Forum Thread Details
  • Replies 4 replies
  • Subscribers 662 subscribers
  • Views 8777 views
  • Users 0 members are here
Related

Raspberry Pi Fuse - Have you ever tripped it?

Sean_Miller

I got a little sloppy and threw a spark on my Raspberry pi.

 

After, the SD card light shows no sign of life and the SPI Display somewhat flickers.  It never boots.

 

Google quickly showed that the fuse is self healing over what could be minutes, hours, or even days.

 

So, my question is - anyone ever trip their fuse?  How long did it take to function again?

 

-Sean

Parents

  • I would test the polyfuse first make sure it wasn't the issue if it is one thing you could do is replace it or just bridge it if you really wanted but I don't recommend. 

     

    you should be reading 5 volts on both sides with a small drop on the one side this is normal.  I just tested as well since I had one on my bench it is a 267T one which is 2.6amp from what I came to understand.

     

    For a dollar for the part it might be worth finding a replacement 2.6amp polyfuse.  I am going to say its probably a max 6v as well.

     

    and it could be late and I am just talking out loud again? lol

Reply

  • I would test the polyfuse first make sure it wasn't the issue if it is one thing you could do is replace it or just bridge it if you really wanted but I don't recommend. 

     

    you should be reading 5 volts on both sides with a small drop on the one side this is normal.  I just tested as well since I had one on my bench it is a 267T one which is 2.6amp from what I came to understand.

     

    For a dollar for the part it might be worth finding a replacement 2.6amp polyfuse.  I am going to say its probably a max 6v as well.

     

    and it could be late and I am just talking out loud again? lol

Children
  • in reply to gam3t3ch

    Gave it a day and no luck.

     

    I actually think I zapped outside of the poly fuse.  Looking at the schematic, it appears the polyfuse is off the USB power in.   I was powering with the 5V pin.

     

    However, I think I actually zapped it by putting 16V through the headphone jacks ground .  :-)

     

    I was trying to get the hum out of an LM386 amplifier circuit and thought I'd power it from as close to the battery as possible to see if that made a different. 

     

    Boy did it!  No more hum, that's for sure.

     

    Oddly, when I put the 5V rail on the O-scope, it cycles between 3.3 and ~5Vs consitently.  In turn it cycles 600mA and 400 mA just sitting there dead with a red LED.

     

    Would be interesting to fix, I guess, after I get my project back together with another PI.