FCC Certification ...

I note that Farnell UK declares very strong policy statements, which include:

Statement of Quality Policy (part) [my highlighting]

 

All employees will be appropriately trained so they understand fully the importance of meeting customer as well as statutory and regulatory requirements. All training will be recorded.

Top management support will be given at all levels of the business to ensure that sufficient resource is available to realise customer expectations, to ensure legal compliance and to see that the requirements of any relevant national or international standards are satisfied.

That sounds very professional, and it doesn't leave much room for misinterpretation.

So why is there so much difficulty in locating and supplying the relevant certifications that were obtained by Raspberry Pi?  Or does the above Statement of Quality Policy apply only to Farnell UK?

I note that Farnell UK declares very strong policy statements, which include:

 

Statement of Quality Policy (part) [my highlighting]

 

All employees will be appropriately trained so they understand fully the importance of meeting customer as well as statutory and regulatory requirements. All training will be recorded.

 

Top management support will be given at all levels of the business to ensure that sufficient resource is available to realise customer expectations, to ensure legal compliance and to see that the requirements of any relevant national or international standards are satisfied.

I decided to see if any of the Newark support folks on live chat have any such training

on FCC regulatory requirements.  Here's the relevant excerpt:

me:  What are you basing your opinion on? Have you been trained at all on FCC rules?

agent:  No I have not you may contact the FCC directly or you may contact the Raspberry PI foundation.

agent:  I have sent you a link for that before.

me:  Is there someone else I can chat with that has some training on FCC rules?

agent:  We are not trained on FCC rules I apologize.

me:  Is there someone else I can chat with that has some training on FCC rules?

agent:  No I am sorry we do not have anyone that is trained on that in our department.

while you can teach things by rote there's little real value in that.

Funnily enough my teacher wife and another have worked out the results are hugely better by teaching new entrants the times table using rote learning.( .. and they retain it)

For those of us in the older age group, this was always the way, and it didn't necessarily do us any harm.

I agree that getting someone interested first, will get better results.

In the arduino stuff I've done having them blink lights in the first lesson has worked to get them interested, before diving into the how and why.

"It's a hardware problem... No Damn it,, it is obviously a software problem "

We also have that with our network people, ".. its your network, no its your program .."

So can we see that with interference.

"... its your RaspberryPi .... no its your overly sensitive pacemaker ..."

mark

I  am just a rasp-pi user but i am intelligent in other fields of endeavor,, and what I want to know is why are you guys so hell bent on this FCC debate instead of concentrating on us r-pi users ??  I have asked a couple questions with no response but I am getting a full law degree on FCC regulations !!    lol,,,    Is there a way that u can take your debate off-line,, and keep us paying users satisfied with what we have at the moment ?   Don't get me wrong,, I am enjoying your FCC debate and educational concerns and all that,, but I thought this forum was for R-pi questions and problems,,, and also enticing us with cool projects  ??      Sincerely, Chuck Smith

This is an engineering forum, and compliance with EMC regulations is part and parcel of professional electronics engineering.  There is no escaping it.

Engineering aside, seeking residential EMC compliance is also the socially  responsible thing to do, because it affects everyone.  If an unintentional radiator causes a pacemaker to fail or a traffic fatality to happen, no amount of smilies will make up for it.  It is very serious.

The regulatory certifications are not frivolous, but mandatory for a reason.  Raspberry Pi has no free pass.

To those who don't care about the EMC impact of their devices, I recommend simply to not read the threads about Class B certification.  But everyone should care.

PS. There is plenty of discussion here about  Pi technology and applications, but it's in other threads.

Chuck

I agree 100% with what Morgaine stated.

I have asked a couple questions with no response

Looking at your postings every question you raised has been answered, so are we missing something (other than you not marking them as answered despite multiple answers).?

and keep us paying users satisfied with what we have at the moment ?

I wasn't aware anyone paid for access to element14's forums, and there is no joining fee, so maybe you refer to your internet time.?

Perhaps you mean the item you have paid for, but doesn't meet the necessary laws?.

There are many threads on multiple different groups, and you don't require to have every one of them email you, or indeed read them.

Unlike some forums where it shows your unread content, e14 isn't the same.

IMO this is the correct place to have the debate about FCC requirements regarding RaspberryPi.

Yes it shouldn't be required, however we the users don't dictate that, the FCC does, and the manufacturers and suppliers are required to meet that, however in this case its not been done, hence the conversation.

If you want a similar comparison, it's like buying a car, where the manufacturer has tested this model for compliance in their country, and for some others.

The dealership that sells that model has issued a warning that it doesn't comply, so the users drive it when it doesn't comply, or they pay mega$ to test it for compliance.

The problem with the first option, is it may result in major costs if something goes wrong and causes damage to others.

Mark

Is there a way that u can take your debate off-line,, and keep us paying users satisfied with what we have at the moment ?  

Chuck,

   In a university class, it is annoying when the professor allows a student to enroll without the required prerequisite courses,

who then unfortunately monopolizes the class time with remedial questions.  Everyone else wishes the professor would have

enforced the prerequisites.

You seem to have the same discomfort here where "remedial" issues are being discussed rather than how to get along with

using our RPi's. We share that discomfort and are wishing that E14 would have enforced the FCC prerequisites for residential

sales, prior to importing and selling the device in large numbers.

But in this case, it doesn't make sense to try to discuss the issue "offline" using PMs, because it affects a wide class of users.

There has been an attempt to discuss it more privately in the "top member" forum, but that discussion ended with

"that's a good question, we'll ask our legal experts and get back to you", with nothing further after considerable time.

Fortunately, it's not exactly like a classroom where discussion can be monopolized, as plenty of other threads here

are able to proceed in parallel.

Take your intelligence and post the questions in the proper thread, if you have some left read the title of this thread.

It is not a LOL thing, and if the use of acronyms make you "throw up" you need to see a doctor. If you do take the opportunity to ask him/her to figure in which "endeavours" your intelligence is located because if you are a "paying" user of the forum your intelligence is being abused by someone.

If you are not interested in this subject or have nothing to contribute you are more than welcome to ignore it.

Sincerely

John Doe

SORRY  that i interrupted your FCC Certification discussion.

I get this in my email ,titled as ...  " -Re: FCC Certification "

I have a Raspberry Pi so anything in my email that starts with   ,, i assume i should read it,,, don't ya think ?

I am interested in that Certification discussion but more interested in R-pi problems, solutions and projects.    I do not know why I got the email that has the " Re:FCC Certification"  and I will not read it anymore.

I respect you answering me though,, thank you

Sincerely, Chuck

Chuck

I believe you have clicked on the receive email notifications at the top ie the RaspberryPi group.

Unfortunately there seems to be no way to stop individual threads from sending, despite the ability to also receive them independant of the Group setting.

Your situation where you wish to receive new threads, but be able to ignore others, is not unique.

I will post this in the feedback section .

In the meantime ... sorry, I suggest delete it, or set a filter that automatically deletes it for you.

But do keep an eye out regarding it, I'm sure there will be some other notifications, as its fairly important.

Mark

thanks Mark,

I am new to the raspberry groups and element14 , et al.

I am currently trying to make my r-pi speak    I cannot get any sound out of it as of now ?  I have tried a few things but nothing ?

I guess i am going to go down to the local Radio shack and buy a cheap set of pc speakers powered on their own and see what happens,

I also brought up the internet, but when i get to a video,  it tells me that adobe flash player needs to be updated ?   I would think the r-pi SD card cannot handle the adobe download ?  Maybe I am losing it 

Any thoughts ?

Sincerely, Chuck,,,,,, U.S.A.  state of Delaware

Chuck,

  The element14 forum threads are organized by topic, as relected in their titles.

Please try to post questions on adobe flash in a thread related to that topic,

rather than on the FCC thread.   That helps members to monitor threads of interest

and avoid being bothered by other threads.

If you can't find such a thread, you can start a new one.  One such thread is here:

http://www.element14.com/community/message/72936

Chuck,

  The element14 forum threads are organized by topic, as relected in their titles.

Please try to post questions on adobe flash in a thread related to that topic,

rather than on the FCC thread.   That helps members to monitor threads of interest

and avoid being bothered by other threads.

If you can't find such a thread, you can start a new one.  One such thread is here:

http://www.element14.com/community/message/72936