Booting  issue on raspberry Pi 2

Are you saying you have multiple cards and only the one with Win 10 will now boot? Or that you created a Win 10 card, then tried to re-image it with noobs and open elec?

If it is multiple cards, did the others ever boot?

There is nothing permanent that occurs on the Ras Pi when you boot from different SD cards with diverse operating systems, so if it boots from win 10, the hardware should be good and the problem would be with the noobs and openelec images or the way that they are written to the SD card.

Give a few more details and we'll see if we can get you going.

Mike

Yes, I have 3 cards.

1. noobs card

2.openelec card

3. IOT windows 10 card

Everything was working fine. I was able to boot with the openelec card or

the noobs card.

Then i created a windows10 iot card. I booted the pi2 with the iot card,

everything works. I shut down.

I then try to boot with openeclec sd card, it get gets to the rainbow

screen and nothing.

I put back the IOT card in the pi2 and it rebooted. I again shut down.

I then try to boot with the noobs sd card and nothing happen.

I installed both the openelec and noob cards in a different pi. They booted

just fine.

It is baffling that on the pi2, the IOT card is the only one that can be

booted.

It seems to me that the IOT card did something to the pi2.

Well, as has been said before, the raspberry pi DOES NOT have ANY storage onboard. So there is NO WAY that windows can "break" your raspberry pi to make the Linux-cards unbootable.

Because you say "pi2" when you refer to the one that runs "IOT and no linux", I'm starting to wonder if  your NOOBS and openelec are up-to-date. If your SD cards are pre-pi2, the will not boot on the pi2.

I know you said that before the noobs and openelec would boot. But can you humor me and boot one or both of them on the other pi and make sure that they are up-to-date? (I'm not sure how that goes on Openelec or Noobs. I run bare-bones raspbian).

Well, as has been said before, the raspberry pi DOES NOT have ANY storage onboard. So there is NO WAY that windows can "break" your raspberry pi to make the Linux-cards unbootable.

Because you say "pi2" when you refer to the one that runs "IOT and no linux", I'm starting to wonder if  your NOOBS and openelec are up-to-date. If your SD cards are pre-pi2, the will not boot on the pi2.

I know you said that before the noobs and openelec would boot. But can you humor me and boot one or both of them on the other pi and make sure that they are up-to-date? (I'm not sure how that goes on Openelec or Noobs. I run bare-bones raspbian).