Raspberry Pi - Splash Screen

Question

How would I add a splash screen image that is shown on boot rather then the command line text. All the methods I have seen still show the command line then the image. Any ideas appreciated!

atharvabenheckfan · Accepted Answer

hi found this you will need to install omxplayer first sudo apt-get install omxplayer First off, you will want to copy the 15 to 20 second movie file to your Raspberry Pi device. Anything shorter and the video will end before it’s finished booting and you will continue to see the kernel messages. You can use any video file that omxplayer can play back, but I like .mov and .mp4 files. You will need to edit your /boot/cmdline.txt file: sudo nano /boot/cmdline.txt Add quiet to the end of the line. It will look something like this: dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait quiet Make sure that is all on one line. Press ctrl-x , type y to confirm save, then press enter to return to the command line. Copy your video somewhere to the Raspberry Pi. I keep mine in /home/pi/ and call the video video.mov You will now need to create a startup script that will run omxplayer at bootup. I have modified the script from the above link. sudo nano /etc/init.d/asplashscreen #! /bin/sh ### BEGIN INIT INFO # Provides: asplashscreen # Required-Start: # Required-Stop: # Should-Start: # Default-Start: S # Default-Stop: # Short-Description: Show custom splashscreen # Description: Show custom splashscreen ### END INIT INFO do_start () { omxplayer /home/pi/video.mov & exit 0 } case "$1" in start|"") do_start ;; restart|reload|force-reload) echo "Error: argument '$1' not supported" >&2 exit 3 ;; stop) # No-op ;; status) exit 0 ;; *) echo "Usage: asplashscreen [start|stop]" >&2 exit 3 ;; esac : Press ctrl-x , y to confirm saving, and press enter to return to the command line Now you need to set the file to be executable sudo chmod a+x /etc/init.d/asplashscreen And activate it sudo insserv /etc/init.d/asplashscreen You should now be ready to go! Reboot your Pi and enjoy the startup movie.

atharvabenheckfan · Answer

this solution will show 4-5 lines of command text before the movie which cannot be bypassed