Featured Articles
Announcing Pi
Technical Specifications
Raspberry Pi FAQs
Win a Pi
Raspberry Pi Wishlist
Actions
Forum Thread Details
  • State Not Answered
  • Replies 7 replies
  • Subscribers 677 subscribers
  • Views 862 views
  • Users 0 members are here
Related

Raspberry PI  (B) + NXP Explore NFC

Former Member

Hi,

 

Please help!!

 

I have purchased a Raspberry Pi (B) and a NXP Explore NFC board, I need to use them to send file from Raspberry to NFC enabled phone.

I have tried the demo/sample code but no luck, it just cannot detect my NFC enabled phone (Samsung Note II).

Can someone help?

 

regards

 

 

pi@raspberrypi ~/NFC/P2P-SNEP_clientPUT $ sudo ./Snep_client

Enter: piBoardRev

piboardRev: Revision string: 000d

, board revision: 2

OK: phbalReg_R_Pi_spi_Init

wId: 109

spiFD: 0

spiMode: 0

spiBPW: 8

spiDelay: 0

spiSpeed: 1e8480 2000000

Enter: phbalReg_R_Pi_spi_OpenPort

Chip version: 82

phpalI14443p3a_Sw_Init

phpalI14443p4a_Sw_Init

phpalI14443p3b_Sw_Init

phpalFelica_Sw_Init

phpalI18092mPI_Sw_Init

phacDiscLoop_Sw_Init

phhalHw_FieldReset

DiscLoopInit

DiscLoopDemo

Pooling: 5

Pooling: 4

Pooling: 3

Pooling: 2

Pooling: 1

Pooling: 5

Pooling: 4

Pooling: 3

Pooling: 2

Pooling: 1

Pooling: 5

Pooling: 4

Pooling: 3

Pooling: 2

Pooling: 1

Pooling: 5

Pooling: 4

Pooling: 3

Pooling: 2

Pooling: 1

Pooling: 5

Pooling: 4

Pooling: 3

Pooling: 2

Pooling: 1

Parents
  • 0

    I'm interested in this discussion as I have a Nexus7 and NFC ring.

     

    I did find that a number of the apps were designed for 'tap and go' ie they needed to be tap'ed together before they communicate.

    It's possible that this is stopping the transfer from being triggered.

     

    As I understand the 'tap and go' is for transferring very small pieces of data (usually for payment) between a card (or equivalent) and a host.

    In the case of two phones one would act as host, and the other as the 'tag' or 'card'.

     

    Since most of these devices have bluetooth, why would you want to use NFC for passing data.?

     

    Mark

Reply
  • 0

    I'm interested in this discussion as I have a Nexus7 and NFC ring.

     

    I did find that a number of the apps were designed for 'tap and go' ie they needed to be tap'ed together before they communicate.

    It's possible that this is stopping the transfer from being triggered.

     

    As I understand the 'tap and go' is for transferring very small pieces of data (usually for payment) between a card (or equivalent) and a host.

    In the case of two phones one would act as host, and the other as the 'tag' or 'card'.

     

    Since most of these devices have bluetooth, why would you want to use NFC for passing data.?

     

    Mark

Children
No Data