Raspberry Pi A+ boot problem

I have just received and assembled my Pi A+ and it won't boot. Red power LED on aok, Green ACT LED blinks once then goes out.

Have checked all troubleshooting blogs but no go. Powered up board with SD ejected, and ACT LED comes on, no change when SD inserted. Changed power source and TV. Still no go.

Help!

Using A+ board with Element14 8GB micro SD with NOOBS pre installed, USB attached combo keyboard/mouse, and RCA connector to old Sony TV.

Parents

0 cstanton over 10 years ago

Hello,
This sounds like a problem with the SD Card, this usually occurs when it hasn't been imaged properly or becomes corrupt.

If you have another computer with an SD Card reader then you should be able to re-image it?
Cancel
Vote Up +1 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 cstanton over 10 years ago

Hello,
This sounds like a problem with the SD Card, this usually occurs when it hasn't been imaged properly or becomes corrupt.

If you have another computer with an SD Card reader then you should be able to re-image it?
Cancel
Vote Up +1 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data