Raspi cam does not detect cacmera it shows "no camera available"

Project 25 days ago

HI I have a problem on my raspi camera. This is what I get. May I know what is the possible problem?

pi@raspberrypi:~ $ vcgencmd get_camera
supported=1 detected=0, libcamera interfaces=1
pi@raspberrypi:~ $ i2cdetect -y 10
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- 64 -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
pi@raspberrypi:~ $ dmesg | grep -i camera
pi@raspberrypi:~ $ ls /dev/video*
/dev/video10 /dev/video13 /dev/video16 /dev/video20 /dev/video23
/dev/video11 /dev/video14 /dev/video18 /dev/video21 /dev/video31
/dev/video12 /dev/video15 /dev/video19 /dev/video22
pi@raspberrypi:~ $ python3 camera_test.py
[ WARN:0@0.671] global ./modules/videoio/src/cap_gstreamer.cpp (2401) handleMessage OpenCV | GStreamer warning: Embedded video playback halted; module v4l2src0 reported: Cannot identify device '/dev/video0'.
[ WARN:0@0.671] global ./modules/videoio/src/cap_gstreamer.cpp (1356) open OpenCV | GStreamer warning: unable to start pipeline
[ WARN:0@0.671] global ./modules/videoio/src/cap_gstreamer.cpp (862) isPipelinePlaying OpenCV | GStreamer warning: GStreamer: pipeline have not been created
[ WARN:0@0.671] global ./modules/videoio/src/cap_v4l.cpp (902) open VIDEOIO(V4L2:/dev/video0): can't open camera by index
Cannot open camera

0 feiticeir0 25 days ago

It would be better if you could specify

- Camera version

- Raspberry OS version

- Raspberrry PI Board version (is it 4, 3b+, 5) ?

Also, that could be a bad cable. Can you change it ? have you checked the connector of the camera ? The camera also as small connector that "clicks" in the camera PCB.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

0 Project 21 days ago in reply to feiticeir0

Hi, raspberry pi camera module version 2. And we have the bullseye version. Upon testing it again supported=1 detected=1 libcamera interface=0 this is what happened. Then upon testing libcamera -hello it says no camera available

{gallery}My Gallery Title
REPLACE THIS TEXT WITH YOUR IMAGE IMAGE TITLE: THEN IMAGE DESCRIPTION
REPLACE THIS TEXT WITH YOUR IMAGE IMAGE TITLE: THEN IMAGE DESCRIPTION
REPLACE THIS TEXT WITH YOUR IMAGE IMAGE TITLE: THEN IMAGE DESCRIPTION
REPLACE THIS TEXT WITH YOUR IMAGE IMAGE TITLE: THEN IMAGE DESCRIPTION
REPLACE THIS TEXT WITH YOUR IMAGE IMAGE TITLE: THEN IMAGE DESCRIPTION

{gallery}My Gallery Title

REPLACE THIS TEXT WITH YOUR IMAGE