Hello All,
I am glad to share my IoT project - AutoHome : IoT for Home Automation in this Raspberry Pi group
of Element14 Community.
AutoHome turns your mobile into a location-agnostic real-time Home Appliance remote, anywhere,
anytime! The Home Appliance can be controlled not just within home, but from anywhere, as long
as the devices are network-reachable.
This demo shows the Arduino version of AutoHome wherein the Lasko Room Heater is controlled
by using my Android Smartphone running my LaskoHeaterRemote app as per the below key combinations :
_____________________________________________________________
Lasko Room Heater Button :: Android Keys
_____________________________________________________________
Power On/Off -- Power + Volume Up + Volume Down
Plus -- Volume Up
Minus -- Volume Down
Oscillate -- Power + Volume Up
High/Low -- Power + Volume Down
Timer -- Volume Up + Volume Down
_____________________________________________________________
Demo : AutoHome - Internet of Things(IoT) for Home Automation - Raspberry Pi version :
https://www.youtube.com/watch?v=LQ7NM2CKo3M
The demo contains the below segments :
1. What is AutoHome?
2. What can AutoHome do?
3. How does AutoHome all of that?
4. AutoHome overview
5. Raspberry Pi - AutoHome - Circuit
6. AutoHome - Introduction
7. AutoHome - Demo
8. AutoHome - Non-line-of-sight(NLOS) demo
9. AutoHome - Platform
10. AutoHome - Bringup
11. AutoHome - Android & Raspberry Pi
12. AutoHome - Challenges overcome - Raspberry Pi version
13. AutoHome - Timeline
14. AutoHome - Statistics
15. AutoHome - Scope
AutoHome - Raspberry Pi version includes below components :
1. Raspberry Pi 3 Model B v1.2
2. GPIO extension board
3. Breadboard
4. Jumper wires
5. Infrared transmitter
6. LCD (I2C)
7. Android Smartphone
8. Infrared-controlled Home Appliance - Lasko Room Heater
There is an Arduino version of this project as well. Here is the link for the same.
Demo : AutoHome - Internet of Things(IoT) for Home Automation - Arduino version :
https://www.youtube.com/watch?v=cZg5UvX9iPY
The demo contains the below segments :
1. What is AutoHome?
2. What can AutoHome do?
3. How does AutoHome all of that?
4. AutoHome overview
5. Arduino - AutoHome - Circuit
6. AutoHome - Introduction / Bridge
7. AutoHome - Demo / Bridge
8. AutoHome - Non-line-of-sight(NLOS) demo / Bridge
9. AutoHome - Auto-reset recovery / Bridge
10. AutoHome - Introduction / Serial
11. AutoHome - Demo / Serial
12. AutoHome - Non-line-of-sight(NLOS) demo / Serial
13. AutoHome - Auto-reset recovery / Serial
14. AutoHome - Platform
15. AutoHome - Bringup / Bridge
16. AutoHome - Android & Arduino / Bridge
17. AutoHome - AVR MCU code - Build and Upload automation / Bridge
18. AutoHome - Bringup / Serial
19. AutoHome - Android & Arduino / Serial
20. AutoHome - AVR MCU code - Build and Upload automation / Serial
21. AutoHome - Challenges overcome - Arduino version
22. AutoHome - Timeline
23. AutoHome - Statistics
24. AutoHome - Scope
AutoHome - Arduino version includes below components :
1. Arduino Yún
2. Infrared transmitter
3. Jumper wires
4. LCD (I2C)
5. Android Smartphone
6. Infrared-controlled Home Appliance - Lasko Room Heater
Cheers!
