
Most of the problem with the software and driver board are solved. I was even able to get fault LED on driver board OFF. I am not able to start the motor. Can someone Please guide me in starting the motor.

Most of the problem with the software and driver board are solved. I was even able to get fault LED on driver board OFF. I am not able to start the motor. Can someone Please guide me in starting the motor.
Have you read through its documentation?
Yes, I am getting stuck at opening the wizard pool. Nothing can be done in the wizard pool for starting motor from there. There not enough information given about it anywhere in the documentation. One more thing what should I choose in Driver board for Board Assignment window. Should I choose nothing in it. Since TMC9660 board is not displayed on the Driver board drop down menu.
When I'm participating in a road test, I usually set up a slack channel, and invite the fellow roadtesters via the e14 messaging functionality:
I created a slack channel for the XXXXX roadtest
Only goal is to share learnings and sources for documentation, ask for comparison or peer check, warn for possible woes.
For things that are too early to post or discuss online.The goal is not to influence each others work or verdicts
if you are interested, welcome to join on https://join.slack.com/t/xxx
It helps, because you know they are working on exactly the same board and software.
In the past, some members joined, some didn't. I had slack channels that were never used, and some that were rather busy with supporting each other. I always delete those channels when the road test end date passed.
This is something I'll consider setting up for future RoadTests
What is the discord server link for it.
What is the discord server link for it.
This is something I'll consider setting up for future RoadTests