Actions
Forum Thread Details
  • Replies 6 replies
  • Subscribers 332 subscribers
  • Views 679 views
  • Users 0 members are here
Related

Looking for 3D printing and scanning recommendations for hobbyist

Former Member

I am looking at getting into the 3D printing/scanning as a hobbyist and would like to hear about some recommendations on what systems work well with one another.  especially when it comes to scanning with a kinect system and what software works best.  I have been searching on the internet to gain insight on which 3d printer would be best for my interest and that's when I came across the element14 site.  I'm glad to have become a member.  So, which 3d printer are the best for hobbyist?  Looking for robust, reliable system.  Is the makerbot or cube good systems or are there systems just as good if not better at a lower cost?  I would appreciate your response.

Thanks,

Chazmanot

Parents

  • Thanks for the feedback!  i really appreciate it.  There are two systems that I am looking at:  the MakerGear and the Robox cue.  Makergear had tons of 5 star reviews while reviewers were knocking the MakerBot.  With Makerbot, I don't want to get locked into proprietary software "it seems" to me.  Robox has some great features but seem like they are a start up company.  Any comments on these two printers?  I'll keep you posted.  Thanks Again.

Reply

  • Thanks for the feedback!  i really appreciate it.  There are two systems that I am looking at:  the MakerGear and the Robox cue.  Makergear had tons of 5 star reviews while reviewers were knocking the MakerBot.  With Makerbot, I don't want to get locked into proprietary software "it seems" to me.  Robox has some great features but seem like they are a start up company.  Any comments on these two printers?  I'll keep you posted.  Thanks Again.

Children
  • in reply to Former Member

    Charles,

    The Makergear M2 is a great printer.  I'm not sure what the Robox Cue is.  Did you mean Robox from CEL? http://robox.cel-uk.com/ If that's the case I haven't had the opportunity to test one out yet as mostly beta testers/kickstarter backers have these.  I know they have had some issues along the way but it does look promising for a printer.  Like I said before Makerbot is a great printer but can get something of similar quality for a lot less.

     

    Nate