Actions
Forum Thread Details
  • Replies 3 replies
  • Subscribers 472 subscribers
  • Views 489 views
  • Users 0 members are here
Related

Home Fabricating

Catwell

Does anyone make their own PCBs at home? If so, share how you do it.

 

 

Also, anyone have any experience using a CNC router for circuit printing?

 

 

I'm not very fond of chemical baths, acid baths, etc; is there a way to make a PCB without the typical steps? ie: Etching,

 

Catwell

Parents

  • Hi Catwell,

     

    I use strip boards, and for high current power supplies use Strip or sometimes Vero boards.

    You are not fond of chemicals; and you intend to use a CNC router, which you may have at your disposal with the required software(CAD) to convert the PCB layout into scalar. Control the depth of cut, and you have a PCB ready.

    A CNC milling or an engraver may also be used for the same.

    All this, provided you have access to a well equipped toolroom or workshop.

    Happy development.

Reply

  • Hi Catwell,

     

    I use strip boards, and for high current power supplies use Strip or sometimes Vero boards.

    You are not fond of chemicals; and you intend to use a CNC router, which you may have at your disposal with the required software(CAD) to convert the PCB layout into scalar. Control the depth of cut, and you have a PCB ready.

    A CNC milling or an engraver may also be used for the same.

    All this, provided you have access to a well equipped toolroom or workshop.

    Happy development.

Children
No Data