based on documentation it show 2.2 1/2W J, not sure which resistor i need to replace? any expert can guide me?
Thanks
Be sure to click 'more' and select 'suggest as answer'!
If you're the thread creator, be sure to click 'more' then 'Verify as Answer'!
based on documentation it show 2.2 1/2W J, not sure which resistor i need to replace? any expert can guide me?
Thanks
The original resistor appears as shown, and I have observed that it consistently burns R7914 and cracks IC7905. Additionally, I have replaced the 3x power boards over the past four years.
rio
If the IC cracks and resistor burns I would suspect IC failure (mosfet stuck in conducting state, leading to overheating and burning of the resistor). Maybe some overvoltage spikes? If it was the same board I would also suspect some other component failure that is killing converters - but as I understand power modules were replaced?
If the IC cracks and resistor burns I would suspect IC failure (mosfet stuck in conducting state, leading to overheating and burning of the resistor). Maybe some overvoltage spikes? If it was the same board I would also suspect some other component failure that is killing converters - but as I understand power modules were replaced?