Hello,
We are a US manufacturer. Recently Iwent to order a relay for one of our products and found it to be dicontinued. I'm not
very good with the elctronics parts world so wanted to ask for help.
The part number was a Stancor Electronics #129-903
Plug-In Relay; Contacts:SPST-NO; Contact Carry Current:18A; Coil Voltage AC Max:120V; Relay Mounting:Plug-In; Relay Terminals:Screw
we just called in Relay 115 Volt.
Can someone help? Please reply to wds@esicotriton.com
Thank you.
Bill
Here is what the side of the unit sais.
A.C. ONLY 250V 18A
1 H.P. @ 125V-2H.P. @ 250V
COIL 115V 50/60HZ
WHAT DO I LOOK FOR IN AN ELECTRONIC SUPPLY BOOK? 
Bill,
As long as you only need something that does the same job, just look for a relay with:
120VAC coil
Contact rating of 250V @ 18A minimum (i.e. you can use a 20A or 25A relay)
If you needed something form/fit/functional equivalent, that might be different.
PS Realy Specialties say they have 23 in stock, if that helps ;-)
http://www.relayspec.com/product_list.php?subcatid=45&sel_manf=113
Post back if you still need help. I have attached a catalogue page showing the item.
Regards,
Jonathan Point
| Pg_064_65.pdf |
Bill,
As long as you only need something that does the same job, just look for a relay with:
120VAC coil
Contact rating of 250V @ 18A minimum (i.e. you can use a 20A or 25A relay)
If you needed something form/fit/functional equivalent, that might be different.
PS Realy Specialties say they have 23 in stock, if that helps ;-)
http://www.relayspec.com/product_list.php?subcatid=45&sel_manf=113
Post back if you still need help. I have attached a catalogue page showing the item.
Regards,
Jonathan Point
| Pg_064_65.pdf |
