I know a bit about CO2 sensing.
Is this a one off or mass production application ?
Do you care much about power consumption/size/response time ?
I can't really advise you much without this information.
I know a bit about CO2 sensing.
Is this a one off or mass production application ?
Do you care much about power consumption/size/response time ?
I can't really advise you much without this information.
Both the humidistat and CO2 measurement is a new thing to me and my team, we are all students and this is our final year project.
What is your project ?
Try Gas Sensing Solutions (www.gassensing.co.uk) for the CO2 sensor.
I think you will have to do humidty separately - look at Farnell 1784720 for a voltage output device at a reasonable price.
My project is a remote enviornmental measure, where the sensors will send in the voltage to my microcontroller to transmit the reading via RF to my receiver at a distance away and print onto the LCD screen.
I had assumed that you had searched the Farnell website - they offer several CO2 sensors starting at £125 each.
The GSS part is smaller, a bit cheaper and uses less power (I don't think you need the dev kit, just the sensor).
You could buy and build the Elektor kit but it will cost you more (£137) www.elektor.com/magazines/2010/may/in-vehicle-co2-meter.1321993.lynkx
Besides the power constraints, you need also consider your range expectations. For instance, there are a few humidity sensors out there that do well in the mid-range of humidity senseing (from 15% to 85%); it is when you EXCEED this range that a 'better' (more expensive) sensor is required. I'm not up on my CO2 sensor, but if you are looking for variations from 'normal air' content, again, there are many in the 20% range. Lastly, you need to consider the distance for your remote sensor; the standard practice for remote sensing is the 4-20ma transmitter method, and, yes, there are 'off-the-shelf' solutions (4-20;CO2,Humidity,Temp. etc.) such as from' Vaisala' for (very approx.) $600 US/ channel.