Meet the Challengers - Low Power IoT Design Challenge

Please join me in congratulating the official sponsored challengers of Low Power IoT - Design Challenge. These 15 challenger's applications have been chosen by Infineon to receive the PSoC 6S2 + AIROC Wi-Fi/Bluetooth Pioneer Kit as part of this challenge!

Example applications could include:

Factory Automation Sensor Hub
Predictive Maintenance Module
Human Presence Detection
Fall Detection Device
Cloud-Connected Robot
Air Quality Monitor

The Challenge Kit	The Specs
PSoC 6S2 + AIROC Wi-Fi/Bluetooth Pioneer Kit (CY8CKIT-062S2-43012) Buy NowBuy Now	• Ultra-low-power PSoC 62 MCU that integrates an Arm Cortex-M4 and Cortex-M0+ onto a single chip and provides up to 2 MB of Flash and 1 MB of SRAM • The Murata 1LV Module hosting the ultra-pow-power Infineon AIROC CYW43012 802.11 b/g/n Wi-Fi + Dual-Mode Bluetooth combo chipset radio • CapSense capacitive touch sensing enabled buttons and sliders • PSoC 5LP MCU for program/debug • Excelon-Ultra 4Mbit 108-MHz QSPI nonvolatile F-RAM in an 8-SOIC package

The Challenge Kit

The Specs

PSoC 6S2 + AIROC Wi-Fi/Bluetooth Pioneer Kit (CY8CKIT-062S2-43012)

Buy NowBuy Now

• Ultra-low-power PSoC 62 MCU that integrates an Arm Cortex-M4 and Cortex-M0+ onto a single chip and provides up to 2 MB of Flash and 1 MB of SRAM

• The Murata 1LV Module hosting the ultra-pow-power Infineon AIROC CYW43012 802.11 b/g/n Wi-Fi + Dual-Mode Bluetooth combo chipset radio

• CapSense capacitive touch sensing enabled buttons and sliders

• PSoC 5LP MCU for program/debug

• Excelon-Ultra 4Mbit 108-MHz QSPI nonvolatile F-RAM in an 8-SOIC package

Project Phases	Dates
Build Period	27th August - 5th November 2021
Projects Due	5th November 2021
Winners Announced	November 2021
Prizes Shipped	November 2021

Meet the Challengers

HealthScan Pro: A Low-Cost Comprehensive Health Checkup That Fits In Your Pocket

aashishjoshua

Pallet Tracker

amgalbu

Solar Powered Smart Composter for Garden

asokfair

Low Power Backup Sump Pump Control System

cmelement14

Handy BLE drum

fyaocn

Energy Saving Smart Home Hub

vmate

Object Classifier and Counter

guillengap

Smart Home & Monitor

lesmalave

Industrial Current Sensor

levvitaliy

Low Power Secure Entry

ralphjy

IoT Smart Power Supply

sferenci

BMP Display

skruglewicz

Non-Intrusive Load Monitoring Device

taifur

Predictive Maintenance of Industrial Machines using TinyML

vishwasn

Smart Air Quality Monitor

vlasov01

The Terms

Selected official applicants will be chosen to receive the "Kit" listed above. These successful applicants will be our sponsored challengers, and they must use the PSoC 6S2 + AIROC Wi-Fi/Bluetooth Pioneer Kit (CY8CKIT-062S2-43012) within their project, and publish their final code and designs on the element14 Community for others to use. Those not chosen as sponsored challengers may also join the competition, but they must base their projects around the kit listed above OR another PSoC 6 Kit and adhere to all terms and conditions of the challenge.

They need to post their progress and final project as at least 5 blog posts before the closing date (see above) when projects are due.

Posts which are media rich with photos, videos, and code samples will be viewed more favorably in the judging process.

The Judges have also commented we would please like to encourage that contestants to not use "MbedOS, but actually use ModusToolbox AnyCloud flow and assets, we will judge them much more favorably.

Please keep this in mind with your build.

Congratulations again to our sponsored challengers and any other challengers who use their own PSoC 6 Family kits!