Hi all,
I found a schematic about a AVR development board and modified it with a 8 pin socket. Im a newby with electronics so i hoped somebody could tell me if this could work and if it doesn't were i made a mistake.
Hope to get a respond!
Hi all,
I found a schematic about a AVR development board and modified it with a 8 pin socket. Im a newby with electronics so i hoped somebody could tell me if this could work and if it doesn't were i made a mistake.
Hope to get a respond!
Hi everyone,
Here is my version of the AVR development board that I made. It consists of AVRISPMKII programmer, Power Board which supplies 5V to the target chip for programming, ATtiny Adapter Board, ATmega 28 Pin Adapter Board and a wall wart power supply (not shown).
I went with a modular approach where you can program various Atmel chips by making chip specific adapter boards.
I have tested and verified the adapter boards work properly.
If any one is interested in my design I will supply the art work and part list needed to make the AVR development Boards.
Let me know..
Thanks
Sparky2K7
