Matrix Voice Controlled Robot
element14 presents | Dave Ploeger's VCP Profile | Project Videos
Johnny 4 wasn't very much alive until Dave put the robot's head on R8-D8s body. Johnny needed input - code that would help him to move around in his new body. Join Dave as he finally makes his robot fully functional, he adds a Matrix Voice shield to a Raspberry PI. With the help of snips.ai, which is an offline voice recognition software, he will control the robot with his voice.
Follow this guide for installing the snips.ai and the matrix voice shield:
MATRIX Voice and MATRIX Creator Running Snips.ai
Bill of Materials:
| Product Name | Manufacturer | Quantity | Buy Kit |
|---|---|---|---|
| Matrix Voice | Matrix Labs | 1 | Buy Now |
| Arduino Nano, ATmega328-MCU | Arduino | 1 | Buy Now |
| Raspberry PI 3B+ | ON SEMICONDUCTOR | 1 | Buy Now |
| 4 CH LOGIC LEVEL CONVERTER | Adafruit | 1 | Buy Now |
| PCA9685 PWM/Servo Driver, 16-Channel, 12-Bit, I2C | Adafruit | 1 | Buy Now |
| LED Module Type:Board + LED | Adafruit | 1 | Buy Now |
| GP2Y0A41SK0F - Distance Measuring Sensor | SHARP | 2 | Buy Now |
Additional Parts:
| Product Name | Quantity |
|---|---|
| SG90 Servos | 7 |
| LED Neopixel ring with 8 LEDs | 2 |
| Prototype boards | 1 |
| Headers and wires | 1 |
| 6V geared motors, unknown gear ratio | 1 |
Code and 3D models are attached to this document!
Top Comments
-
davedarko
-
Cancel
-
Vote Up
0
Vote Down
-
-
Sign in to reply
-
More
-
Cancel
Comment-
davedarko
-
Cancel
-
Vote Up
0
Vote Down
-
-
Sign in to reply
-
More
-
Cancel
Children