Sign Up for the RoadTest: DLP® Pico™ Display Projector EVM-BeagleBone Black





{tabbedtable} Tab LabelTab Content

Introductory Guide to the 0.2 nHD LightCrafter™ Display Evaluation Module (EVM)

Learn from a TI expert how the DLP® LightCrafter Display 2000 EVM can be used for developing a wide array of ultra-mobile and ultra-portable display applications for consumer, wearable and IoT devices.


In this webinar, we will review how to use the 0.2 nHD EVM in combination with the BeagleBone Black to enable development of low-cost embedded systems featuring pico projection.



The DLP® LightCrafter Display 2000 EVM plugs into the BeagleBone Black


The evaluation module (EVM) features the DLP2000 chipset comprised of the DLP2000 .2 nHD DMD, DLPC2607 display controller and DLPA1000 PMIC/LED driver. This EVM comes equipped with a production ready optical engine and processor interface supporting 8/16/24-bit RGB parallel video interface in a small-form factor.


Key product/tool links:

Key documentation:

Video links:



Philippe Dollo

DLP Pico Applications Engineer with a Master’s in IC and Embedded Systems Design from University of Texas at Austin.

Webinar Recording

Click Here To Watch the Webinar Recording