User Language Programs

Name: User Language Programs
Start: 2012-11-27T20:00Z
End: 2012-11-27T21:00Z

When

27 Nov 2012 2:00 PM to 3:00 PM Central Time (US & Canada)

Where

online

Event Type

User Language Programs

Edwin Robledo

CadsoftUSA General Manager

4PM EST

In this presentation, we will quickly overview what ULPs are, the tools available for writing them, and some of the most useful ULPs available such as those used for DXFimport, pick and place file generation,etc.

Jorge_Garcia over 12 years ago

Hi Joe,

To my knowledge there's no ULP that will do this for you automatically, however it can be done manually. You can use the WIRE command to draw the areas that need to be routed from the panel on a non-copper layer such as 46 milling. When you generate your gerbers export layer 46 as it's own gerber and let the board house know that the features on that layer need to be milled from the board.

Keep in mind that the Autorouter will not respect the milling layer so it's important to be careful. Since you're just panelizing it shouldn't be an issue.

hth,
Jorge Garcia
Cadsoft Support
- Cancel
- Vote Up 0 Vote Down
- Sign in to reply
- More
- Cancel
Former Member over 12 years ago

Is an ULP what I would use with Eagle to panelize circular boards with breakrouting as shown here? http://www.eurocircuits.com/index.php/technology-guidelines/pcb-panel-guidelines/95-how-to-panelise-round-shaped-pcbs
Or can such panelization be done with Eagle alone?
- Cancel
- Vote Up 0 Vote Down
- Sign in to reply
- More
- Cancel