Picozed download to Flash issue

Question

We have been successful downloading FLASH with Vitis 2020.1. During a download session, the user cancelled the download in midstream and the board became a brick.

We tried to re-download the Flash and we get message: uboot error and Flash programming initialization has failed.

Does any one know how we fix this issue so we can download again?

Also we cannot read from Flash thru the JTAG debugger.

narrucmot · Answer

You should be able to rescue the board by using JTAG and TFTP to boot a known-good Linux OS image and then use the Linux flash utilities to erase and reprogram the QSPI. Don't forget to reset the boot mode switches to JTAG before attempting this. You can download a known-good PetaLinux BSP for the PicoZed here: http://avnet.me/zedsupport Instructions for booting via JTAG can be found here: https://github.com/Avnet/petalinux/blob/2020.1/documentation/pz/how_to_boot.txt I hope this helps. --Tom