Anyone try flashing a boot image on a Kingston 32GB Micro SD Card?

I flashed the "ultra96v2_oob_2018_3_190530.img" onto a Kingston 32GB ( first I formatted the 32 GB Micro SD Card to MSDOS FAT format , MBR)
Used the Balena Etcher to flash it and it failed !

Question :
1. Is there another way to flash/burn the image onto the SD Card, other than Balena.
2. Is Kingston 32 GB an accepted SD Card for Ultra 96v2 ?

3. What are the format parameters for the SD Card. There is ExFAT and MSDOS. Any recommendations.

Appreciate any inputs.

Parents

kiranshashiny over 6 years ago

I had to flash a new MicroSD Card as I did not the factory default MicrSDCard, so resorted to downloading new image and flashing to the SDCard.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
jafoste4 over 6 years ago in reply to kiranshashiny

Hi,

When choosing an SD Card I recommend users follow the SD Card Advice document we make available.
SD Card Advice V2 for Zynq and Zynq UltraScale+ SoC Products | Zedboard

Please let me know your results after your testing.

1. you can use win32diskimager
2.I cannot say for certain if it will work as we have not tested a 32GB sd card at this point. I believe we did test a 32GB Delkin sd card however.
3. We typicall make a 1GB boot FAT32 patition and the rest EXT4 to house the rootfs.

Thx,
Josh
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Reply

jafoste4 over 6 years ago in reply to kiranshashiny

Hi,

When choosing an SD Card I recommend users follow the SD Card Advice document we make available.
SD Card Advice V2 for Zynq and Zynq UltraScale+ SoC Products | Zedboard

Please let me know your results after your testing.

1. you can use win32diskimager
2.I cannot say for certain if it will work as we have not tested a 32GB sd card at this point. I believe we did test a 32GB Delkin sd card however.
3. We typicall make a 1GB boot FAT32 patition and the rest EXT4 to house the rootfs.

Thx,
Josh
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Children

No Data