Actions
Forum Thread Details
  • State Not Answered
  • Replies 4 replies
  • Subscribers 104 subscribers
  • Views 766 views
  • Users 0 members are here
Related

Android lagging on Beaglebone Black

sush1993

I have an android 4.4 kitkat loaded on my sd card (sdhc class 10), with a GUI loaded with different apps such as to monitor two sensor values and to control the GPIOs of the beaglebone black amongst many other apps, but my GUI keeps on lagging on the Touchscreen panel which is a dell (S2240T).

 

I have kept the clock speed at 1 GHZ of my BBB.

 

What do I do to avoid this lagging?

 

Thanks,

Parents
  • 0

    Hi ,

     

    Firstly I have to tel you, the BeagleBoneBlack is a great board in it's own right.

    I, myself own a good few of them doing all sorts of weird and wonderful stuff with them.

    I have to admit that it is probably not the best board to run Android on it because of many Android/Kernel/Hardware/Codecs issues.

    Yes I have Android running on one and yes I also had this lagging GUI with all the jitters, flickers and a series of other weird

    issues.

    Unless you really have the real need to run android on the BealeBoneBlack I would actually encourage you not to.

    But, you are free to contact me on this platform should you have the need to continue with android.

    There is quite a bit to be done to customise a working setup.

  • 0 in reply to volly

    Hi Yunus,

     

    I have been working on a project from last 6 months where we have interfaced different sensors and made a user interface in android running on a BeagleBoneBlack  (Rev C) to be operated by the user. Hence currently I don't have any option but to continue with android on BBB.

    So if you could suggest me how to customise it and help me on the same.

    And yes, in future if we wish to switch to some other developing board than which one would you suggest (with android OS).

Reply
  • 0 in reply to volly

    Hi Yunus,

     

    I have been working on a project from last 6 months where we have interfaced different sensors and made a user interface in android running on a BeagleBoneBlack  (Rev C) to be operated by the user. Hence currently I don't have any option but to continue with android on BBB.

    So if you could suggest me how to customise it and help me on the same.

    And yes, in future if we wish to switch to some other developing board than which one would you suggest (with android OS).

Children
No Data