Beaglebone AI booting from SD card issue.

Question

I'm trying to boot Beaglebone AI from SD with the latest image, but all the time getting this: What I'm doing wrong?

jissdeodates · Answer

chkvsk , I would suggest you use this image ( https://debian.beagleboard.org/images/am57xx-debian-9.9-lxqt-armhf-2019-08-03-4gb.img.xz ) for the BB-AI as Sean_Miller suggested. This is available here ( https://beagleboard.org/latest-images ) the official webpage of Beaglebone.

crisdeodates · Answer

Your snapshot says 'missing modules'. It might be a bad image. Try flashing the latest image again. PS: In case your image that is pre-flashed iìon the eMMC is one of recent, you might only have to update it manually without going through the hurdle of flashing again.

clem57 · Answer

Either a bad SD card or a bad image. chkvsk What software did you use to build the image with?

Sean_Miller · Answer

I successfully used this image a couple of times now: https://www.element14.com/community/external-link.jspa?url=https%3A%2F%2Fdebian.beagleboard.org%2Fimages%2Fam57xx-debian… It's from here: https://beagleboard.org/latest-images I found a lot more is needed to get it rolling as a fully functioning microcontroller with GPIO - for instance, your filesystem may need to grow to meet your SD card capacity. So, I wrote it all down here: BeagleBone AI Survival Guide V3.18: PWM, I2C, Analog/Digital Read/Write, Vision AI, Video Text Overlays, Audio, & Hardware See ya', Sean

chkvsk · Answer

Good news. Everything is working no. I used 8GB SD card instead of 4GB. Solution was simple, but not obvious. (Or I just missed something...) Thank you for your help.

mp2100 · Answer

Make sure you are using the BB AI image (not the BB Black image). The BB AI image file name starts with am57xx (use the link that Sean gave)

gdstew · Answer

My experience has been that dd will report an error if it runs out of space when writing to "of" if it is a block device.

Beaglebone AI booting from SD card issue.

Top Replies