Actions
Forum Thread Details
  • Replies 3 replies
  • Subscribers 165 subscribers
  • Views 259 views
  • Users 0 members are here
Related

"stamping" repetitive circuit. possible?

Former Member

Hello, I was designing a schematic that had a repetitive pattern (two

transistors and 5 resistors) used in 6 outputs.

 

I designed once and cut/pasted the others, fine with that but...

 

I was thinking if is possible to draw a small circuit inside a box, in

my schematic, name it like "power output" and just "stamp" (draw) a

small box where needed but when I opened the board designer all the

parts belonging to these box should appear.

 

Is it possible?

 

TIA

 

orlando

 

Parents

  •  

    "Jose Orlando" <jorlando@remove.nospam.uol.com.br> wrote in message

    news:hum4vd$v9o$1@cheetah.cadsoft.de...

    Hello, I was designing a schematic that had a repetitive pattern (two

    transistors and 5 resistors) used in 6 outputs.

    >

    I designed once and cut/pasted the others, fine with that but...

    >

    I was thinking if is possible to draw a small circuit inside a box, in my

    schematic, name it like "power output" and just "stamp" (draw) a small box

    where needed but when I opened the board designer all the parts belonging

    to these box should appear.

    >

    Is it possible?

    >

    TIA

    >

    orlando

     

    if you mean duplicating, now it's possible, have a look at:

    eagle home page --> download --> ulps --> duplicating_v45.zip

     

    hope this could help

     

    Maurice

     

     

     

     

     

Reply

  •  

    "Jose Orlando" <jorlando@remove.nospam.uol.com.br> wrote in message

    news:hum4vd$v9o$1@cheetah.cadsoft.de...

    Hello, I was designing a schematic that had a repetitive pattern (two

    transistors and 5 resistors) used in 6 outputs.

    >

    I designed once and cut/pasted the others, fine with that but...

    >

    I was thinking if is possible to draw a small circuit inside a box, in my

    schematic, name it like "power output" and just "stamp" (draw) a small box

    where needed but when I opened the board designer all the parts belonging

    to these box should appear.

    >

    Is it possible?

    >

    TIA

    >

    orlando

     

    if you mean duplicating, now it's possible, have a look at:

    eagle home page --> download --> ulps --> duplicating_v45.zip

     

    hope this could help

     

    Maurice

     

     

     

     

     

Children
No Data