Actions
Forum Thread Details
  • Replies 7 replies
  • Subscribers 177 subscribers
  • Views 830 views
  • Users 0 members are here
Related

Edit board profile

autodeskguest

I have a circular pcb on Eagle 4.14 pro and I would like to add a notch to the external edge of the pcb.  I can add the notch on the document layer but cannot remove the remaining circular arc across the notch as my notch lines do not connect to the existing pcb profile.  How do I do this?

--

Browser access to CadSoft Support Forums at http://www.eaglecentral.ca

 

Parents

  • user wrote on Wed, 12 August 2009 13:45

    Phil Dixon schrieb:

     

    I have a circular pcb on Eagle 4.14 pro and I would like to add a

    notch to the external edge of the pcb.  I can add the notch on the

    document layer but cannot remove the remaining circular arc across

    the notch as my notch lines do not connect to the existing pcb

    profile.  How do I do this?

     

    A "circle" is always closed (360°).

     

    Remove the circle and draw an arc instead, that starts and ends exactly

    at the edges of the notch.

     

    Tilmann

     

     

     

     

    Thanks Tilmann

     

    Unfortunately, the actual pcb was imported from Autocad and has a few other notch-like dimples in other locations around the 'circle' so these would need to be replicated using this technique.  Any other suggestions?  

    --

    Browser access to CadSoft Support Forums at http://www.eaglecentral.ca

     

Reply

  • user wrote on Wed, 12 August 2009 13:45

    Phil Dixon schrieb:

     

    I have a circular pcb on Eagle 4.14 pro and I would like to add a

    notch to the external edge of the pcb.  I can add the notch on the

    document layer but cannot remove the remaining circular arc across

    the notch as my notch lines do not connect to the existing pcb

    profile.  How do I do this?

     

    A "circle" is always closed (360°).

     

    Remove the circle and draw an arc instead, that starts and ends exactly

    at the edges of the notch.

     

    Tilmann

     

     

     

     

    Thanks Tilmann

     

    Unfortunately, the actual pcb was imported from Autocad and has a few other notch-like dimples in other locations around the 'circle' so these would need to be replicated using this technique.  Any other suggestions?  

    --

    Browser access to CadSoft Support Forums at http://www.eaglecentral.ca

     

Children
No Data