Pads

Thak you very much! Both work very well.

I also found this:

http://gaussmarkov.net/eagle/padsize.html

It also works across the board.

M

"Travis G" <fightspammers@gmail.com> wrote in message

news:hbgm8e$ueq$1@cheetah.cadsoft.de...

On 10/18/2009 11:40 AM, martin grove wrote:

Hi again,

Sorry for the newbie question but I'm really at my wit's end.

I would like to change the diameter of the pads to the passive components

on

the already routed board image but the CHANGE command won't let me, even

if

the Pads layer is active. All I get is a rude noise, even while the

status

bar tells me to left-click on the component I want to change.

Also, it would make my life a lot easier if I could duplicate a section

of

the board elsewhere on the same board without having to do it in the

schematic editor. Imagine 2 channels of a stereo system placed side by

side

with interconnecting circuitry routed manually. This would look neater,

not

to mention making trouble-shooting a lot easier on the actual physical

hardware.

Any help would be gratefully appreciated.

Thanks,

Martin

 

 

 

Yeah, that got me too when I first started with Eagle. To change the pads,

you have to open the library and edit the package for that part in the

library.

1. To figure out what library the part is in, click Info (the i button)

and then click the part. It will tell you the Library name and the package

name in that library.

2. Find the Library in the Control Panel under Libraries, then

double-click the library name (not a component or the package) to open the

Library.

3. Now click Library->Package from the Library's menubar. Select the

package name you got from step 1. Now use Change->Drill or

Change->Diameter or Change->Shape on the pads.

4. Once done, save the library, and go back to the board window. Now click

Library on the board's menubar, and then click update all. Viola!

 

I recommend you start creating your own libraries of updated parts. This

will prevent you from overwriting your changes when you update eagle. Once

you have created a new lib file, you can open the lib and then copy parts

from eagle's lib to the open one, which simplifies the whole process.

 

 

As for the 2nd part: you can, but it's not intuitive. First, finish with

your schematic and board. THen copy the board file, and open the copied

file in eagle. Now do a group and cut and paste to copy the entire layout

to another section of the board. Now manually run needed tracks between

the two.

 

Travis

Thak you very much! Both work very well.

I also found this:

http://gaussmarkov.net/eagle/padsize.html

It also works across the board.

M

"Travis G" <fightspammers@gmail.com> wrote in message

news:hbgm8e$ueq$1@cheetah.cadsoft.de...

On 10/18/2009 11:40 AM, martin grove wrote:

Hi again,

Sorry for the newbie question but I'm really at my wit's end.

I would like to change the diameter of the pads to the passive components

on

the already routed board image but the CHANGE command won't let me, even

if

the Pads layer is active. All I get is a rude noise, even while the

status

bar tells me to left-click on the component I want to change.

Also, it would make my life a lot easier if I could duplicate a section

of

the board elsewhere on the same board without having to do it in the

schematic editor. Imagine 2 channels of a stereo system placed side by

side

with interconnecting circuitry routed manually. This would look neater,

not

to mention making trouble-shooting a lot easier on the actual physical

hardware.

Any help would be gratefully appreciated.

Thanks,

Martin

 

 

 

Yeah, that got me too when I first started with Eagle. To change the pads,

you have to open the library and edit the package for that part in the

library.

1. To figure out what library the part is in, click Info (the i button)

and then click the part. It will tell you the Library name and the package

name in that library.

2. Find the Library in the Control Panel under Libraries, then

double-click the library name (not a component or the package) to open the

Library.

3. Now click Library->Package from the Library's menubar. Select the

package name you got from step 1. Now use Change->Drill or

Change->Diameter or Change->Shape on the pads.

4. Once done, save the library, and go back to the board window. Now click

Library on the board's menubar, and then click update all. Viola!

 

I recommend you start creating your own libraries of updated parts. This

will prevent you from overwriting your changes when you update eagle. Once

you have created a new lib file, you can open the lib and then copy parts

from eagle's lib to the open one, which simplifies the whole process.

 

 

As for the 2nd part: you can, but it's not intuitive. First, finish with

your schematic and board. THen copy the board file, and open the copied

file in eagle. Now do a group and cut and paste to copy the entire layout

to another section of the board. Now manually run needed tracks between

the two.

 

Travis