Actions
Forum Thread Details
  • State Not Answered
  • Replies 9 replies
  • Subscribers 176 subscribers
  • Views 1463 views
  • Users 0 members are here
Related

create links in schematic / kann man im Schaltplan links zu Bauteilen erstellen?

trixi0815

Hi @ all,

is it possible to make a "link" to a komponent on a other Schematik-sheet like "Port 12 is on sheet **sheetnumber**?

 

ich möchte auf einer Seite im Schaltplan einen Link / Hinweis zu einem Bauteil auf einer anderen Schaltplanseite erstellen : Z.B. "Klemme 12 befindet sich auf Seite **Seitennummer**" ... also keine Feste seitennummer, da sich diese noch ändern kann

Vielen Dank

trixi

Parents
  • 0

    This is the user chat English section, just as the label clearly says.  If

    you can't even get something that simple right, you have little chance

    designing successful circuits or running sophisticated software like Eagle.

    Answering your question is therefore pointless in any case.

    --

    Web access to CadSoft support forums at www.eaglecentral.ca.  Where the CadSoft EAGLE community meets.

     

  • 0 in reply to autodeskguest

    This is the user chat English section, just as the label clearly says.  If

    you can't even get something that simple right, you have little chance

    designing successful circuits or running sophisticated software like Eagle.

      Answering your question is therefore pointless in any case.

     

    Hi Olin,

     

    Take it easy, you don't know the background of this user. He could be

    new, perhaps he is using the e14 interface which isn't very helpful in

    guiding the user to the right forum(as we have seen with all the

    raspberry pi and beaglebone black questions we have been getting) or who

    knows what other circumstance.

     

    I appreciate your experience with EAGLE and all the knowledge and

    experience you bring to the table, new users to the forum can really

    benefit from your valuable contributions. However, they'll never get the

    chance if they get axed on the first post.

     

    Best Regards,

    Jorge Garcia

     

     

Reply
  • 0 in reply to autodeskguest

    This is the user chat English section, just as the label clearly says.  If

    you can't even get something that simple right, you have little chance

    designing successful circuits or running sophisticated software like Eagle.

      Answering your question is therefore pointless in any case.

     

    Hi Olin,

     

    Take it easy, you don't know the background of this user. He could be

    new, perhaps he is using the e14 interface which isn't very helpful in

    guiding the user to the right forum(as we have seen with all the

    raspberry pi and beaglebone black questions we have been getting) or who

    knows what other circumstance.

     

    I appreciate your experience with EAGLE and all the knowledge and

    experience you bring to the table, new users to the forum can really

    benefit from your valuable contributions. However, they'll never get the

    chance if they get axed on the first post.

     

    Best Regards,

    Jorge Garcia

     

     

Children
No Data