HELP WITH MAKING PCB

Question

I was given a pdf file of a schematic and a netlist. I am trying to make a board without making the schematic in EAGLE. is there a way that I could upload the netlist into the PCB after I added the parts from the library so that it could create airwires? I am new to EAGLE. Suggestions will be very much appreciated. thank you.

autodeskguest · Answer

On 19/04/2018 3:54 p.m., Hennessey Balbin wrote: I was given a pdf file of a schematic and a netlist. I am trying to make a board without making the schematic in EAGLE. is there a way that I could upload the netlist into the PCB after I added the parts from the library so that it could create airwires? I am new to EAGLE. Suggestions will be very much appreciated. thank you. Hi While what you are suggesting sounds simple there would be a lot of work to achieve it. The net list would have to be in the form of an Eagle script. All the elements(packages/footprints) you placed on the board would need to be named to match the names in the netlist and the contacts (pad names) would need to be the same as in the netlist. It is nearly always better to duplicate the schematic from the pdf. As you select and add the components to the schematic and connect the pins with the NET tool the airwires will be in place on the board. If new to eagle, ensure you do some tutorials on the process of creating a schematic and then laying out the board. HTH Warren ... use NNTP://news.cadsoft.de and a functional news reader like Thunderbird! --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

genebren · Answer

If you are going to be playing around in electronics and working with PCBs, this is a great time to learn working with eagle. Go ahead and jump in and create the schematic and then layout the board. Jumping into the middle and going straight to the board would be far more difficult and you will just have to face the learning curve on the next project.

There are a lot of people on this site would could help you with any questions you have on your way.

Good Luck,

Gene

HELP WITH MAKING PCB

Top Replies