Create package from autocad 2012 to eagle 5.11.0

Question

Greating for all

I have a problem. I made a package of an integrated circuit in autocad 2012.

Here is the package (every color represent one layer). http://dl.dropbox.com/u/37984244/fotos%20foros/package_autocad.png

I use DXF-Eagle script converter 2.2.3.

Here is the configuration http://dl.dropbox.com/u/37984244/fotos%20foros/converter.png

Here is the result inside eagle http://dl.dropbox.com/u/37984244/fotos%20foros/package_eagle.png

My problem is that I need that the green feet appear fill in eagle. but like you see, eagle only take that package like a WIRE!!!!, not like a SMD feet.

Thanks for your help. If a I the find the answer I'll tell you here.

e14 Contributor · Accepted Answer

Am 18.12.2011 14:20, schrieb gorth kill: Hi Warren Thanks for your help. My interest is too be able to plot a milimetric package. I need extremely precision. > That's bacause I used autocad. However, I just cry out the way to make a confortable trace. if you could recommend me a way to do that, > would be great for me... Thanks a lot. Why do not use RUN make-symbol-device-package-bsdl.ulp You can create a package with the package option. Please read also ..\eagle..\doc\make-symbol-device-package-bsdl-2011-en.pdf Mit freundlichen Grüßen / Best regards Alfred Zaffran -- ______________________________________________________________ Alfred Zaffran Support CadSoft Computer GmbH Hotline: 08635-698930 Pleidolfweg 15 FAX: 08635-698940 84568 Pleiskirchen eMail: < alf@cadsoft.de > Web: Registergericht: Amtsgericht Traunstein HRB 5573 Geschäftsführer: Thomas Liratsch, Dipl.-Ing. Klaus Schmidinger ______________________________________________________________ EAGLE V6 availabe now!

e14 Contributor · Answer

gorth kill wrote: Hi Warren Thanks for your help. My interest is too be able to plot a milimetric package. I need extremely precision. That's bacause I used autocad. However, I just cry out the way to make a confortable trace. if you could recommend me a way to do that, would be great for me... Thanks a lot. Eagle can represent your package with a resolution (0.1 micon with v5) far finer than a board house can manufacture so there is no need to use autocad. Ensure you have learned how to create library parts by doing the tutorials that are included with Eagle and found in many places on the intenet. Then create the package you need where it is a matter of choosing mm/inch and a grid appropriate to the scale of your device as determined using it's datasheet. What is the name of the package you are trying to make? I feel sure it will already exist in the Eagle libraries. Warren -- Viewed / responded via the newsgroup at news.cadsoft.de