Actions
Forum Thread Details
  • Replies 19 replies
  • Subscribers 179 subscribers
  • Views 5235 views
  • Users 0 members are here
Related

How to change all wires?

Former Member

I 'am using Eagle 5.11

 

In my layout I have many traces with  WIDTH of 0.2mm.

Now I would like to change all that wires  in WIDTH 0.15mm.

I know I can do that with the command  CHANGE and GROUP but is there an

other way ?

With GROUP some other wires ( for example WIDTH of 0.5mm ) change too.

 

THANKS

 

 

 

Parents

  • Karst schrieb:

     

    I 'am using Eagle 5.11

     

    In my layout I have many traces with  WIDTH of 0.2mm.

    Now I would like to change all that wires  in WIDTH 0.15mm.

    I know I can do that with the command  CHANGE and GROUP but is there an

    other way ?

    With GROUP some other wires ( for example WIDTH of 0.5mm ) change too.

     

    You could try cmd-change-brd-width.ulp.

     

    Tilmann

     

  • in reply to Former Member

    On 2/8/2011 1:04 PM, Tilmann Reh wrote:

    Karst schrieb:

     

    >> I 'am using Eagle 5.11

    >>

    >> In my layout I have many traces with  WIDTH of 0.2mm.

    >> Now I would like to change all that wires  in WIDTH 0.15mm.

    >> I know I can do that with the command  CHANGE and GROUP but is there an

    >> other way ?

    >> With GROUP some other wires ( for example WIDTH of 0.5mm ) change too.

     

    You could try cmd-change-brd-width.ulp.

     

    Tilmann

    Also, you should look into classes, by assigning nets to a certain

    class, you can control width and clearance for that class. that way your

    hi current or power nets don't need to change with your signal nets.

    maybe this is what you are really looking for.

     

    also, you can group by box and then ungroup certain elements, but I

    don't remember how to do it, it is possible though.

     

Reply
  • in reply to Former Member

    On 2/8/2011 1:04 PM, Tilmann Reh wrote:

    Karst schrieb:

     

    >> I 'am using Eagle 5.11

    >>

    >> In my layout I have many traces with  WIDTH of 0.2mm.

    >> Now I would like to change all that wires  in WIDTH 0.15mm.

    >> I know I can do that with the command  CHANGE and GROUP but is there an

    >> other way ?

    >> With GROUP some other wires ( for example WIDTH of 0.5mm ) change too.

     

    You could try cmd-change-brd-width.ulp.

     

    Tilmann

    Also, you should look into classes, by assigning nets to a certain

    class, you can control width and clearance for that class. that way your

    hi current or power nets don't need to change with your signal nets.

    maybe this is what you are really looking for.

     

    also, you can group by box and then ungroup certain elements, but I

    don't remember how to do it, it is possible though.

     

Children
No Data