Actions
Forum Thread Details
  • Replies 5 replies
  • Subscribers 180 subscribers
  • Views 1007 views
  • Users 0 members are here
Related

Cam Job Creating gerber files with Out of Range warnings on Viewer

Former Member

When I create the gerber files for a board it gives an error in the gerber viewer (ViewMate) that says "Coordinate exceeds largest allowed value (1000.0 inches). Coordinate maps to X=1190.8922 Y=-2147.483649 inch using current origin and Data Format: 2.4, Leading zeros suppressed, Absolute, English.

 

I have checked over the entire view of the board file to see if something was placed outside of the dimension frame but can find nothing. Any suggestions?

 

*I would attached the .brd file but it won't let me for some reason*

 

Thanks,

 

Eric

Parents

  • Eric Sanderson schrieb:

     

    When I create the gerber files for a board it gives an error in the

    gerber viewer (ViewMate) that says "Coordinate exceeds largest

    allowed value (1000.0 inches). Coordinate maps to X=1190.8922

    Y=-2147.483649 inch using current origin and Data Format: 2.4,

    Leading zeros suppressed, Absolute, English.

     

    I have checked over the entire view of the board file to see if

    something was placed outside of the dimension frame but can find

    nothing. Any suggestions?

     

    Most probably, it's simply the wrong data format, or one more bug in

    ViewMate, or both. First I'd try a decent gerber viewer (several

    problems have been reported with ViewMate, but I never had problems with

    GCprevue) and also check the data format (if the device in the CAMP is

    set up the same way as your import to the viewer).

     

    I would attached the .brd file but it won't let me for some reason

     

    There should be a size limit (meanwhile).

     

    However, I don't think it's related to the board, so that attachment

    wouldn't be of any use anyway. If at all, you could provide the gerber

    file in question (zipped, please).

     

    Tilmann

     

Reply

  • Eric Sanderson schrieb:

     

    When I create the gerber files for a board it gives an error in the

    gerber viewer (ViewMate) that says "Coordinate exceeds largest

    allowed value (1000.0 inches). Coordinate maps to X=1190.8922

    Y=-2147.483649 inch using current origin and Data Format: 2.4,

    Leading zeros suppressed, Absolute, English.

     

    I have checked over the entire view of the board file to see if

    something was placed outside of the dimension frame but can find

    nothing. Any suggestions?

     

    Most probably, it's simply the wrong data format, or one more bug in

    ViewMate, or both. First I'd try a decent gerber viewer (several

    problems have been reported with ViewMate, but I never had problems with

    GCprevue) and also check the data format (if the device in the CAMP is

    set up the same way as your import to the viewer).

     

    I would attached the .brd file but it won't let me for some reason

     

    There should be a size limit (meanwhile).

     

    However, I don't think it's related to the board, so that attachment

    wouldn't be of any use anyway. If at all, you could provide the gerber

    file in question (zipped, please).

     

    Tilmann

     

Children
No Data