Actions
Forum Thread Details
  • Replies 36 replies
  • Subscribers 190 subscribers
  • Views 4704 views
  • Users 0 members are here
Related

in V6.0.0 manual routing got really hard

e14 Contributor

somethings changed, when i manually route and click on the destination pad, if i dont click dead center now... im left with tiny tiny airwires

5.11 didnt do this... i have messed with alot of settings, nothing seems to help

Parents

  • On 12/16/2011 12:55 PM, Mitch Solomon wrote:

    somethings changed, when i manually route and click on the destination pad, if i dont click dead center now... im left with tiny tiny airwires

    5.11 didnt do this... i have messed with alot of settings, nothing seems to help

     

     

    Check your catch factor and select factor settings, by default they

    should be 5% and 2% respectively. Perhaps on a MAC this is different or

    the OS interprets the values differently it may be worth playing with

    them to get everything working nicely. Try 7% and 3% or maybe 8% and 4%.

     

    hth,

    Jorge Garcia

     

Reply

  • On 12/16/2011 12:55 PM, Mitch Solomon wrote:

    somethings changed, when i manually route and click on the destination pad, if i dont click dead center now... im left with tiny tiny airwires

    5.11 didnt do this... i have messed with alot of settings, nothing seems to help

     

     

    Check your catch factor and select factor settings, by default they

    should be 5% and 2% respectively. Perhaps on a MAC this is different or

    the OS interprets the values differently it may be worth playing with

    them to get everything working nicely. Try 7% and 3% or maybe 8% and 4%.

     

    hth,

    Jorge Garcia

     

Children
  • in reply to e14 Contributor

    Guest wrote:

     

    On 12/16/2011 12:55 PM, Mitch Solomon wrote:

    somethings changed, when i manually route and click on the destination pad, if i dont click dead center now... im left with tiny tiny airwires

    5.11 didnt do this... i have messed with alot of settings, nothing seems to help

     

     

    Check your catch factor and select factor settings, by default they

    should be 5% and 2% respectively. Perhaps on a MAC this is different or

    the OS interprets the values differently it may be worth playing with

    them to get everything working nicely. Try 7% and 3% or maybe 8% and 4%.

     

    hth,

    Jorge Garcia

     

     

    It's not that - you can zoom in all you want, and virtually hover over the exact centre of the pad, and it won't "ping" to let you know it's connected.

     

    It even happens if you route a wire into another wire - if the other wire is on the grid, it doesn't think you've finished, so you have to double-click to stop it carrying on.