HEEEEEEELP PANIC Cant open board from project

I just did some investigation.

Opened a version 5.11 project using version 6

Saved it under a different name

Then I close the Schematic window.

Then I observe that on top of the board window suddenly a Black/Yellow

ribbon appears saying F/B Annotation has been severed

Then I close that window also.

When I open the schematic again........

"Harry H. Arends"  schreef in bericht

news:jci4cl$s5n$1@cheetah.cadsoft.de...

This week I upgraded from version 5.11 to 6.00 .

Yesterday I saved a project , schematic and board, but now after opening the

schematic again I get a error.

In a different window it says:

Loading

C:/Users/h.arends/Documents/Eagle/projects/Turntable/Arduino_Nano_V020.brd

...

Error:

line 1308, column 286: Unexpected ''.

If this means that I have to redo that complete board again No Thanks

version 6

Any suggestions how to solve this problem

Op Sat, 17 Dec 2011 14:32:29 +0100 schreef Harry H. Arends 

<info@oldtimetech.nl>:

Then I observe that on top of the board window suddenly a Black/Yellow 

ribbon appears saying F/B Annotation has been severed

see: "V6 F/B Annotation has been Severed" from 3 days ago.

It's just a warning. It will only turn into a problem if you change 

something in the window that has been left opened.

Strange that the warning says "f/b annotation HAS BEEN severed". I should 

think that at least that must be: "Warning: f/b annotation could be 

severed if you close the schematic window"

(not using V6 myself, yet)

Richard

I have seen the subject mentioned.

But my problem is NOT the same.

I did made alterations on the design and whilst saving I got the message.

After that opening the schematic and board, the schematic opens correct but

the board doesn’t open but shows a text message as stated.

I went back to a backup and redone the whole design yesterday, one Sunday

with the family gone.

So as I have paid for an update to the new version I keep on working in

version 5.11 unless I got a answer from Cadsoft.

Harry

"Richard Herman"  schreef in bericht

news:op.v6mz88n56i2wlp@homer.fritz.box...

Op Sat, 17 Dec 2011 14:32:29 +0100 schreef Harry H. Arends

<info@oldtimetech.nl>:

Then I observe that on top of the board window suddenly a Black/Yellow

ribbon appears saying F/B Annotation has been severed

see: "V6 F/B Annotation has been Severed" from 3 days ago.

It's just a warning. It will only turn into a problem if you change

something in the window that has been left opened.

Strange that the warning says "f/b annotation HAS BEEN severed". I should

think that at least that must be: "Warning: f/b annotation could be

severed if you close the schematic window"

(not using V6 myself, yet)

Richard

I have seen the subject mentioned.

But my problem is NOT the same.

I did made alterations on the design and whilst saving I got the message.

After that opening the schematic and board, the schematic opens correct but

the board doesn’t open but shows a text message as stated.

I went back to a backup and redone the whole design yesterday, one Sunday

with the family gone.

So as I have paid for an update to the new version I keep on working in

version 5.11 unless I got a answer from Cadsoft.

Harry

"Richard Herman"  schreef in bericht

news:op.v6mz88n56i2wlp@homer.fritz.box...

Op Sat, 17 Dec 2011 14:32:29 +0100 schreef Harry H. Arends

<info@oldtimetech.nl>:

Then I observe that on top of the board window suddenly a Black/Yellow

ribbon appears saying F/B Annotation has been severed

see: "V6 F/B Annotation has been Severed" from 3 days ago.

It's just a warning. It will only turn into a problem if you change

something in the window that has been left opened.

Strange that the warning says "f/b annotation HAS BEEN severed". I should

think that at least that must be: "Warning: f/b annotation could be

severed if you close the schematic window"

(not using V6 myself, yet)

Richard

On 14.02.2012 13:15, Wolfgang Sachs wrote:

Hello Richard,

 

I've got a similar problem, when trying to open an existing schematic from 5.11 version. An error message appears, see below, and no sch will be opened. Strange kind of message, in the whole project there isn't any package DKONT5 5F.

 

Wee need a working fix at this stage, because we want to transfer our projects to the new version of course. Or would you recommend to use the 5.11 until the 6.1 is stable ?

 

Kind regards

 

W. Sachs

 

EAGLE Update-Bericht

 

Datum: 14.02.2012 13:09:29

Datei: C:/Dokumente und Einstellungen/sachsw/Eigene Dateien/EigeneDocs/Projekte/Layout/LayoutV1_1/test5.sch

 

Beim Einlesen der intermediären XML-Datei ist ein Fehler aufgetreten.Die XML-Datei wurde als

C:/Dokumente und Einstellungen/sachsw/Eigene Dateien/EigeneDocs/Layout/LayoutV1_1/test5.rpt.sch

in ein Text-Editor-Fenster geladen. Warnung(en):

 

Zeile 1531: Ungültiger Wert 'DKONT 5F' für Attribut 'name' im Tag<package>

 

Fehler:

 

Zeile 1545, Spalte 10: Ungültiges/fehlendes Attribut 'name' im Tag<package>

 

Please send me the file in question by email, so that I can look into

it.

--

Mit freundlichen Gruessen / Best regards

Richard Hammerl

  CadSoft Support -- hotline@cadsoft.de

  FAQ: http://www.cadsoft.de/training/faq/

Hello Richard,

I've got a similar problem, when trying to open an existing schematic from 5.11 version. An error message appears, see below, and no sch will be opened. Strange kind of message, in the whole project there isn't any package DKONT5 5F.

Wee need a working fix at this stage, because we want to transfer our projects to the new version of course. Or would you recommend to use the 5.11 until the 6.1 is stable ?

Kind regards

W. Sachs

EAGLE Update-Bericht 

Datum: 14.02.2012 13:09:29

Datei: C:/Dokumente und Einstellungen/sachsw/Eigene Dateien/EigeneDocs/Projekte/Layout/LayoutV1_1/test5.sch

Beim Einlesen der intermediären XML-Datei ist ein Fehler aufgetreten.Die XML-Datei wurde als

C:/Dokumente und Einstellungen/sachsw/Eigene Dateien/EigeneDocs/Layout/LayoutV1_1/test5.rpt.sch

in ein Text-Editor-Fenster geladen. Warnung(en):

Zeile 1531: Ungültiger Wert 'DKONT 5F' für Attribut 'name' im Tag <package>

Fehler:

Zeile 1545, Spalte 10: Ungültiges/fehlendes Attribut 'name' im Tag <package>

Hi Harry/Richard

Any news on this issue?

I have the same problem at this moment.

Only difference is that i made the board in eagle V6.1.0 for the start.

This happend already 3 times. And getting tired to redraw the board almost every time i made some changes.

Kind regards,

Ton

See your mail on hotline@cadsoft.de

"Richard Hammerl"  schreef in bericht

news:jcq95i$h22$2@cheetah.cadsoft.de...

On 19.12.2011 23:12, Harry H. Arends wrote:

I have seen the subject mentioned.

But my problem is NOT the same.

 

I did made alterations on the design and whilst saving I got the message.

After that opening the schematic and board, the schematic opens correct

but the board doesn’t open but shows a text message as stated.

 

I went back to a backup and redone the whole design yesterday, one

Sunday with the family gone.

 

So as I have paid for an update to the new version I keep on working in

version 5.11 unless I got a answer from Cadsoft.

 

Harry

 

"Richard Herman" schreef in bericht

news:op.v6mz88n56i2wlp@homer.fritz.box...

 

Op Sat, 17 Dec 2011 14:32:29 +0100 schreef Harry H. Arends

<info@oldtimetech.nl>:

 

>> Then I observe that on top of the board window suddenly a Black/Yellow

>> ribbon appears saying F/B Annotation has been severed

>

see: "V6 F/B Annotation has been Severed" from 3 days ago.

 

It's just a warning. It will only turn into a problem if you change

something in the window that has been left opened.

 

Strange that the warning says "f/b annotation HAS BEEN severed". I should

think that at least that must be: "Warning: f/b annotation could be

severed if you close the schematic window"

 

(not using V6 myself, yet)

 

Richard

Hi Richard,

could you send me the file you can't load anymore and could you send

also backup files, if any? So we can look into this...

--

Mit freundlichen Gruessen / Best regards

Richard Hammerl

  CadSoft Support -- hotline@cadsoft.de

  FAQ: http://www.cadsoft.de/training/faq/

On 19.12.2011 23:12, Harry H. Arends wrote:

I have seen the subject mentioned.

But my problem is NOT the same.

 

I did made alterations on the design and whilst saving I got the message.

After that opening the schematic and board, the schematic opens correct

but the board doesn’t open but shows a text message as stated.

 

I went back to a backup and redone the whole design yesterday, one

Sunday with the family gone.

 

So as I have paid for an update to the new version I keep on working in

version 5.11 unless I got a answer from Cadsoft.

 

Harry

 

"Richard Herman" schreef in bericht

news:op.v6mz88n56i2wlp@homer.fritz.box...

 

Op Sat, 17 Dec 2011 14:32:29 +0100 schreef Harry H. Arends

<info@oldtimetech.nl>:

 

>> Then I observe that on top of the board window suddenly a Black/Yellow

>> ribbon appears saying F/B Annotation has been severed

>

see: "V6 F/B Annotation has been Severed" from 3 days ago.

 

It's just a warning. It will only turn into a problem if you change

something in the window that has been left opened.

 

Strange that the warning says "f/b annotation HAS BEEN severed". I should

think that at least that must be: "Warning: f/b annotation could be

severed if you close the schematic window"

 

(not using V6 myself, yet)

 

Richard

Hi Richard,

could you send me the file you can't load anymore and could you send

also backup files, if any? So we can look into this...

--

Mit freundlichen Gruessen / Best regards

Richard Hammerl

  CadSoft Support -- hotline@cadsoft.de

  FAQ: http://www.cadsoft.de/training/faq/