Actions
Forum Thread Details
  • Replies 26 replies
  • Subscribers 189 subscribers
  • Views 3216 views
  • Users 0 members are here
Related

Eurocircuits and V6 .brd files

e14 Contributor

Just mailed two designs to Eurocircuits this afternoon made by Eagle V6.

Received a reject as 'does not look to be a valid .brd file'.

I wonder if they know about the changes in V6?

 

Robert

 

Parents

  • To answer part of my own questions, I found that I can setup a cam job

    for each layer that I need.

    The only question left is for generating a Gerber of an internal power

    plane. Do I include there also the pads (17), via(18) and dimension(20)

    layer?

     

    Robert

     

     

    Morton, after some testing I found where the problem is. The

    gerb274x-4layer.cam only looks at top, bottom, layer 2 and 15. I have

    not found out how I can get it to look at my layer 3.

     

    Furthermore, it will only deal with layer 2 and 15 as signal layers, and

    I have my layer 2 defined as ground plane. Since I got my design error

    free after some manual work, I'd like to keep it. Is there a way in

    Eagle to move the layers to match gerb274x-4layer.cam or another way to

    create Gerber files from my current design?

     

    Regards, Robert

     

     

     

Reply

  • To answer part of my own questions, I found that I can setup a cam job

    for each layer that I need.

    The only question left is for generating a Gerber of an internal power

    plane. Do I include there also the pads (17), via(18) and dimension(20)

    layer?

     

    Robert

     

     

    Morton, after some testing I found where the problem is. The

    gerb274x-4layer.cam only looks at top, bottom, layer 2 and 15. I have

    not found out how I can get it to look at my layer 3.

     

    Furthermore, it will only deal with layer 2 and 15 as signal layers, and

    I have my layer 2 defined as ground plane. Since I got my design error

    free after some manual work, I'd like to keep it. Is there a way in

    Eagle to move the layers to match gerb274x-4layer.cam or another way to

    create Gerber files from my current design?

     

    Regards, Robert

     

     

     

Children
No Data