Bug in gerb274x-4layer.cam

On 15.01.2012 10:51, Robert wrote:

It looks like the gerb274x-4layer.cam job has a bug, according to the

listing. When it processes layer 15, it only reads pads, vias and

dimension, but not the signals on layer 15.

 

Robert

Hi,

I can't reproduce this problem. What EAHLE version do you use? Are

you sure that in the layer 15 sections are activated layer 15 17 18 ?

--

Mit freundlichen Gruessen / Best regards

Richard Hammerl

  CadSoft Support -- hotline@cadsoft.de

  FAQ: http://www.cadsoft.de/training/faq/

On 15.01.2012 10:51, Robert wrote:

It looks like the gerb274x-4layer.cam job has a bug, according to the

listing. When it processes layer 15, it only reads pads, vias and

dimension, but not the signals on layer 15.

 

Robert

Hi,

I can't reproduce this problem. What EAHLE version do you use? Are

you sure that in the layer 15 sections are activated layer 15 17 18 ?

--

Mit freundlichen Gruessen / Best regards

Richard Hammerl

  CadSoft Support -- hotline@cadsoft.de

  FAQ: http://www.cadsoft.de/training/faq/

On 16/01/2012 15:12, Richard Hammerl wrote:

On 15.01.2012 10:51, Robert wrote:

>> It looks like the gerb274x-4layer.cam job has a bug, according to the

>> listing. When it processes layer 15, it only reads pads, vias and

>> dimension, but not the signals on layer 15.

>>

>> Robert

 

Hi,

 

I can't reproduce this problem. What EAHLE version do you use? Are

you sure that in the layer 15 sections are activated layer 15 17 18 ?

 

Richard, take a look at the listing, below is the part that generates

layer 2 and layer 15, taken from the distribution that is in V6.1.0:

-

Name[de]="Innenlage - Layer2"

Name[en]="Inner layer - Layer2"

Prompt[de]=""

Prompt[en]=""

Device="GERBER_RS274X"

Wheel=".whl"

Rack=""

Scale=1

Output="%N.ly2"

Flags="0 0 0 1 0 1 1"

Emulate="0"

Offset="0.0mil 0.0mil"

Sheet=1

Tolerance="0 0 0 0 0 0"

Pen="0.0mil 0"

Page="12000.0mil 8000.0mil"

Layers=" 2 17 18 20"

Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8

4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 0"

Name[de]="Innenlage - Layer15"

Name[en]="Inner layer - Layer15"

Prompt[de]=""

Prompt[en]=""

Device="GERBER_RS274X"

Wheel=".whl"

Rack=""

Scale=1

Output="%N.l15"

Flags="0 0 0 1 0 1 1"

Emulate="0"

Offset="0.0mil 0.0mil"

Sheet=1

Tolerance="0 0 0 0 0 0"

Pen="0.0mil 0"

Page="12000.0mil 8000.0mil"

Layers=" 17 18 20"

Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8

4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 0"

-

You will see that for layer 2, Layers=" 2 17 18 20" , is correctly

specified. For layer15: Layers=" 17 18 20", the layer 15 itself is missing.

Of course it is easy to correct, but distributed incorrect. I fell in

that trap processing my first 4 layer board...

Robert