Actions
Forum Thread Details
  • Replies 2 replies
  • Subscribers 188 subscribers
  • Views 1389 views
  • Users 0 members are here
Related

Setting schematic net line width default ?

e14 Contributor

Greetings - I know I can go in and change the line width of a line on the

schematic, but is there a way to set the default line width for the "net"

line to a different value ?  The default seems to be .006 and I would

prefer to use a thicker line - more like .012 (it looks better on the 8-1/2

  • 11 sheets )

 

mikey

 

--

Web access to CadSoft support forums at www.eaglecentral.ca.  Where the CadSoft EAGLE community meets.

 

Parents

  • Am 24.01.2012 07:37, schrieb Mike Fields:

    Greetings - I know I can go in and change the line width of a line on the

    schematic, but is there a way to set the default line width for the "net"

    line to a different value ?  The default seems to be .006 and I would

    prefer to use a thicker line - more like .012 (it looks better on the 8-1/2

    • 11 sheets )

     

    mikey

     

     

    Check eagle help Configurating eagle. Check for SET NET_WIRE_WIDTH

    (value). Remember if you use a larger value, the connection to a

    resistor etc. may look ugly.

     

    --

    Mit freundlichen Grüßen / With best regards

     

    Joern Paschedag

     

  • in reply to e14 Contributor

    Ah, thanks much - I had snooped around in the options etc, but had not come

    across that.  It is indeed a tradeoff - looking neat vs TOE  (These Old

    Eyes) and just a couple of mils thicker makes the schematic much easier to

    read.

     

    mikey

     

    --

    Web access to CadSoft support forums at www.eaglecentral.ca.  Where the CadSoft EAGLE community meets.

     

Reply Children
No Data