Actions
Forum Thread Details
  • Replies 2 replies
  • Subscribers 174 subscribers
  • Views 1105 views
  • Users 0 members are here
Related

Mouser Part Library for Schematic Design

Former Member

I've got a project that requires me to recreate a PCB that has Mouser branded parts.  Eagle doesn't have a Mouser library as far as I know.  This is kind of a first for me.  What are my options?  Using equivalent parts in the default labraries?

 

P/N
QTYDiameter hole
3103-2-00-00-21-00-00-08-0Mouser5Pins.043" mounting hole min
583-RL1N4004Mouser2D1,D2component dia 0.025
78-1N5239B-TAPMouser1Z10.025
652-RLB1014-104KLMouser1L10.025
581-TAP334K050SCSMouser1C10.02
229-330-RCMouser1R10.02
652-3309W-2-102Mouser1R2
Parents

  • Am 13.03.2012 03:16, schrieb bobdude161:

    I've got a project that requires me to recreate a PCB that has Mouser branded parts.  Eagle doesn't have a Mouser library as far as I know.  This is kind of a first for me.  What are my options?  Using equivalent parts in the default labraries that are normally Mouser?

     

    | P/N  |   | QTY | Diameter hole |

    | 3103-2-00-00-21-00-00-08-0 | Mouser | 5 | Pins | .043" mounting hole min  |

    | 583-RL1N4004 | Mouser | 2 | D1,D2 | component dia 0.025 |

    | 78-1N5239B-TAP | Mouser | 1 | Z1 | 0.025 |

    | 652-RLB1014-104KL | Mouser | 1 | L1 | 0.025 |

    | 581-TAP334K050SCS | Mouser | 1 | C1 | 0.02 |

    | 229-330-RC | Mouser | 1 | R1 | 0.02 |

    | 652-3309W-2-102 | Mouser | 1 | R2 |

     

     

    Mouser is a distributor but not a manufactorer. Do you expect a layout

    programm to support every distributor in the world?

    Get the datasheets from the manufactorers and if the parts are in the

    eagle default libraries then move them into a new library. You can call

    that mouser or whatever you want image

     

    --

    Mit freundlichen Grüßen / With best regards

     

    Joern Paschedag

     

Reply

  • Am 13.03.2012 03:16, schrieb bobdude161:

    I've got a project that requires me to recreate a PCB that has Mouser branded parts.  Eagle doesn't have a Mouser library as far as I know.  This is kind of a first for me.  What are my options?  Using equivalent parts in the default labraries that are normally Mouser?

     

    | P/N  |   | QTY | Diameter hole |

    | 3103-2-00-00-21-00-00-08-0 | Mouser | 5 | Pins | .043" mounting hole min  |

    | 583-RL1N4004 | Mouser | 2 | D1,D2 | component dia 0.025 |

    | 78-1N5239B-TAP | Mouser | 1 | Z1 | 0.025 |

    | 652-RLB1014-104KL | Mouser | 1 | L1 | 0.025 |

    | 581-TAP334K050SCS | Mouser | 1 | C1 | 0.02 |

    | 229-330-RC | Mouser | 1 | R1 | 0.02 |

    | 652-3309W-2-102 | Mouser | 1 | R2 |

     

     

    Mouser is a distributor but not a manufactorer. Do you expect a layout

    programm to support every distributor in the world?

    Get the datasheets from the manufactorers and if the parts are in the

    eagle default libraries then move them into a new library. You can call

    that mouser or whatever you want image

     

    --

    Mit freundlichen Grüßen / With best regards

     

    Joern Paschedag

     

Children
No Data