Actions
Forum Thread Details
  • Replies 2 replies
  • Subscribers 174 subscribers
  • Views 281 views
  • Users 0 members are here
Related

Eagle freezes when trying to print

SXRguyinMA

I've used Eagle in the pst for homebrew PCBs. I'd click print, print to PDF and go from there. I made a new board and tried it today and when I click the print icon Eagle freezes. I noticed there was an update (I was using 6.1.0) so I upgraded to 6.4.0. I still have the same issue. It doesn't matter whether I'm in the schematic capture or PCB layout screen. I also tried it with the last PCB I designed and printed and it locks up with that one as well. Any thoughts?

Parents

  • On 2/23/2013 8:51 PM, Will Lyon wrote:

    I've used Eagle in the pst for homebrew PCBs. I'd click print, print to PDF and go from there. I made a new board and tried it today and when I click the print icon Eagle freezes. I noticed there was an update (I was using 6.1.0) so I upgraded to 6.4.0. I still have the same issue. It doesn't matter whether I'm in the schematic capture or PCB layout screen. I also tried it with the last PCB I designed and printed and it locks up with that one as well. Any thoughts?

     

    --

    To view any images and attachments in this post, visit:

    http://www.element14.com/community/message/70668#70668/l/eagle-freezes-when-trying-to-print

     

     

    Hi Will,

     

    The PDF backend has an issue in version 6.4.0. The workaround is to set

    the solid option in the print dialog.

     

    Try this and let me know how this works for you.

     

    Best Regards,

    Jorge Garcia

    Cadsoft Support

     

Reply

  • On 2/23/2013 8:51 PM, Will Lyon wrote:

    I've used Eagle in the pst for homebrew PCBs. I'd click print, print to PDF and go from there. I made a new board and tried it today and when I click the print icon Eagle freezes. I noticed there was an update (I was using 6.1.0) so I upgraded to 6.4.0. I still have the same issue. It doesn't matter whether I'm in the schematic capture or PCB layout screen. I also tried it with the last PCB I designed and printed and it locks up with that one as well. Any thoughts?

     

    --

    To view any images and attachments in this post, visit:

    http://www.element14.com/community/message/70668#70668/l/eagle-freezes-when-trying-to-print

     

     

    Hi Will,

     

    The PDF backend has an issue in version 6.4.0. The workaround is to set

    the solid option in the print dialog.

     

    Try this and let me know how this works for you.

     

    Best Regards,

    Jorge Garcia

    Cadsoft Support

     

Children
No Data