Actions
Forum Thread Details
  • Replies 2 replies
  • Subscribers 177 subscribers
  • Views 934 views
  • Users 0 members are here
Related

SD Card Connector

autodeskguest

I need to use a Hinged Micro SD Card Connector with a card-detect (CD)

switch.  A suitable part is the Hirose DM3CS-SF and I have managed to find

an Eagle part for this (see attachment).  However, in common with a few

other Eagle parts for SD Card holders with CD switches, there are no

connections for the CD switch or the ground on the schematic symbol.  All

the pads are visible in the board component.  I realise that I can edit the

part as necessary but I wonder why the part is not complete and whether

there is something I am not realising?

Thanks for any assistance,

paradigm

--

Web access to CadSoft support forums at www.eaglecentral.ca.  Where the CadSoft EAGLE community meets.

 

Parents

  • Alan Hood wrote:

    I need to use a Hinged Micro SD Card Connector with a card-detect (CD)

    switch.  A suitable part is the Hirose DM3CS-SF and I have managed to

    find an Eagle part for this (see attachment).  However, in common

    with a few other Eagle parts for SD Card holders with CD switches,

    there are no connections for the CD switch or the ground on the

    schematic symbol.  All the pads are visible in the board component.

    I realise that I can edit the part as necessary but I wonder why the

    part is not complete and whether there is something I am not

    realising?

    Thanks for any assistance,

    paradigm

    --

    Web access to CadSoft support forums at www.eaglecentral.ca.  Where

    the CadSoft EAGLE community meets.

     

    Hi Alan

    Maybe most people dont use the hardware card detect, chosing to use the

    signal on the card pin, anyway simply  add the pins 9 thru 13 to the symbol

    and connect them in the device

    10 is the card detect pin as I see it. Name the others ground with the @

    convention (See HELP - PIN)

     

    HTH

    Warren

     

     

     

    --

    Viewed / responded via the newsgroup at

    news.cadsoft.de

     

     

     

Reply

  • Alan Hood wrote:

    I need to use a Hinged Micro SD Card Connector with a card-detect (CD)

    switch.  A suitable part is the Hirose DM3CS-SF and I have managed to

    find an Eagle part for this (see attachment).  However, in common

    with a few other Eagle parts for SD Card holders with CD switches,

    there are no connections for the CD switch or the ground on the

    schematic symbol.  All the pads are visible in the board component.

    I realise that I can edit the part as necessary but I wonder why the

    part is not complete and whether there is something I am not

    realising?

    Thanks for any assistance,

    paradigm

    --

    Web access to CadSoft support forums at www.eaglecentral.ca.  Where

    the CadSoft EAGLE community meets.

     

    Hi Alan

    Maybe most people dont use the hardware card detect, chosing to use the

    signal on the card pin, anyway simply  add the pins 9 thru 13 to the symbol

    and connect them in the device

    10 is the card detect pin as I see it. Name the others ground with the @

    convention (See HELP - PIN)

     

    HTH

    Warren

     

     

     

    --

    Viewed / responded via the newsgroup at

    news.cadsoft.de

     

     

     

Children
No Data