Actions
Forum Thread Details
  • Replies 4 replies
  • Subscribers 179 subscribers
  • Views 523 views
  • Users 0 members are here
Related

Exporting PCB.brd file to use on LPKP Milling Machine

Former Member

Hi All,

 

I have created a board file from a schematic, following various turorials on the Eagle website and also online.

 

I am now at a stage where I want to make a board using a LPKF milling machine.  I need to export the board files so they can be used with CircuitCam 6.1 and from there I should be ok as used the LPKF machine with Orcad already.

 

Does anyone know the proceedure for this as never exported board files from Eagle before, so unsure of the proceedure?

 

Cheers,

 

Ant

Parents

  • On 6/09/2013 12:30 a.m., Ant Scranney wrote:

    Hi All,

     

    I have created a board file from a schematic, following various

    turorials on the Eagle website and also online.

     

    I am now at a stage where I want to make a board using a LPKF milling

    machine.  I need to export the board files so they can be used with

    CircuitCam 6.1 and from there I should be ok as used the LPKF machine

    with Orcad already.

     

    Does anyone know the proceedure for this as never exported board files

    from Eagle before, so unsure of the proceedure?

     

    Cheers,

     

    Ant

     

    --

    To view any images and attachments in this post, visit:

    http://www.element14.com/community/message/88363#88363

     

     

    Hi

    Read the manual (in the doc folder of your eagle installation). There is

    a section entitled

    "Prototype Manufacture With a Milling Machine"

     

    HTH

    Warren

    Warren

     

     

     

Reply

  • On 6/09/2013 12:30 a.m., Ant Scranney wrote:

    Hi All,

     

    I have created a board file from a schematic, following various

    turorials on the Eagle website and also online.

     

    I am now at a stage where I want to make a board using a LPKF milling

    machine.  I need to export the board files so they can be used with

    CircuitCam 6.1 and from there I should be ok as used the LPKF machine

    with Orcad already.

     

    Does anyone know the proceedure for this as never exported board files

    from Eagle before, so unsure of the proceedure?

     

    Cheers,

     

    Ant

     

    --

    To view any images and attachments in this post, visit:

    http://www.element14.com/community/message/88363#88363

     

     

    Hi

    Read the manual (in the doc folder of your eagle installation). There is

    a section entitled

    "Prototype Manufacture With a Milling Machine"

     

    HTH

    Warren

    Warren

     

     

     

Children
No Data