Hi,
I have buy a acer 24'' 16/9 screen with 1600X1200 resolution and now view
ratio isn't 1/1. Did somebody know a solution with eagle to not see draw
deform ?
Thank you.
Guy
Hi,
I have buy a acer 24'' 16/9 screen with 1600X1200 resolution and now view
ratio isn't 1/1. Did somebody know a solution with eagle to not see draw
deform ?
Thank you.
Guy
That's the point here.
And since you can't simply change your grafics card, you will have to
look for another display with a maximum of 1600x1200 pixels - or live
with the stretched display.
I'm use Mobility P 6.13.10.5779 pilote driver on my old DELL portable (not
problem with old dual screen 4/3 -> not change it)
I see than last release in 2002 was Mobility P 6.13.10.5795 and perhaps
support 16/9 screen and (1920X1200) ? but I can't download it now
(disappear) !!!
I' m search !!
With text program (work, excel...) it's not problem. It's damage then we
don't have a parameter "aspect ratio" by default to "1" in eagle program and
we can change to have screen view very correct !
I'm remember we have this in very old draw programs to adjust more with old
analog screen ...
My real physical resolution portable is 15,4" of 1400 X 1050 pixels
(=1.3333.. = 4/3) but I'm use (officiel) pilote definition 1280 X 1024
(=1.25 !) and view square and circle are correct ! -> exist a parameter
"aspect ratio" ?? ( pixels are square because physical screen dimension=
30.5mm X 24.4mm = 4/3= 1.25 )
I think it's not good time to request that to Klaus 
Sorry for my english,
Thanks,
Guy
That's the point here.
And since you can't simply change your grafics card, you will have to
look for another display with a maximum of 1600x1200 pixels - or live
with the stretched display.
I'm use Mobility P 6.13.10.5779 pilote driver on my old DELL portable (not
problem with old dual screen 4/3 -> not change it)
I see than last release in 2002 was Mobility P 6.13.10.5795 and perhaps
support 16/9 screen and (1920X1200) ? but I can't download it now
(disappear) !!!
I' m search !!
With text program (work, excel...) it's not problem. It's damage then we
don't have a parameter "aspect ratio" by default to "1" in eagle program and
we can change to have screen view very correct !
I'm remember we have this in very old draw programs to adjust more with old
analog screen ...
My real physical resolution portable is 15,4" of 1400 X 1050 pixels
(=1.3333.. = 4/3) but I'm use (officiel) pilote definition 1280 X 1024
(=1.25 !) and view square and circle are correct ! -> exist a parameter
"aspect ratio" ?? ( pixels are square because physical screen dimension=
30.5mm X 24.4mm = 4/3= 1.25 )
I think it's not good time to request that to Klaus
Sorry for my english,
Thanks,
Guy
