Is there any way to print a selection from the 5.0 PCB Editor?
I have a small PCB surrounded by lots of fabrication drawing
text and would like to be able to print just the PCB portion
(e.g. for an assembly drawing or to print and check a layer).
Is there any way to print a selection from the 5.0 PCB Editor?
I have a small PCB surrounded by lots of fabrication drawing
text and would like to be able to print just the PCB portion
(e.g. for an assembly drawing or to print and check a layer).
Hello Eric Agan !:
Usually for assembly drawings I only enable the t/bPlace, t/bNames,
t/bValues, and Dimension layers, then print. That's generally sufficient
to get a nice and clean assembly drawing with part outlines and such.
Workaround - generate pdf file and then selsct area to print ....
Unfortunately no other sensible method 
HTH
--
Grzegorz Zalot
complex ltd.
office tel/fax : +48 32 2505840
mobil : +48 501 301515
Hello Eric Agan !:
Usually for assembly drawings I only enable the t/bPlace, t/bNames,
t/bValues, and Dimension layers, then print. That's generally sufficient
to get a nice and clean assembly drawing with part outlines and such.
Workaround - generate pdf file and then selsct area to print ....
Unfortunately no other sensible method
HTH
--
Grzegorz Zalot
complex ltd.
office tel/fax : +48 32 2505840
mobil : +48 501 301515
